PTO Flywheel Adapter for 18 HP V twin

dbonnell73

Forum Newbie
Joined
Jan 16, 2018
Threads
1
Messages
2
Engine info: Model 350447, Type 1084-A1, Code 95013011

I have an 18HP V twin in a homemade tractor that runs a hydraulic pump off of the flywheel.
The current adapter is held in place with two 5/16" bolts and I have repaired it twice (bolts broke). The adapter bolts to a modified flex coupling.
Is an adapter available that bolts directly to the flywheel or will I need to fabricate one?
Looking for something stronger that uses all 4 bolts available in the flywheel.
adapter.jpgflywheel 1.jpgflywheel 2.jpg
 
Last edited:

dbonnell73

Forum Newbie
Joined
Jan 16, 2018
Threads
1
Messages
2
Thanks for those leads. They led me to some other sources and I was able to find what I think is the correct B&S part. Although the little stud in the middle of the adapter sticking toward the crank shaft is puzzling. I might have to remove this but other than that I think it will work.

I can't post a link because my post count is too low but the B&S part number is 844148.
I'll post pics when I get it mounted up.
 
Top