Results 1 to 6 of 6

Thread: Bad frame

  1. #1

    Join Date
    Nov 2014
    Posts
    10
    Location
    Georgia
    Mower
    John Deere

    Bad frame

    I have a 265 johndeere lawn&garden tractor about a 1991 model. The front frame section is broke. I am wording what frames will work under it.Thanks for the info.

  2.  

  3. #2

    2,500 Post Club
    Boobala's Avatar
    Join Date
    Feb 2015
    Posts
    2,867
    Location
    Central Fl. about 2 hours from DAYTONA !
    Mower
    Murray Select 21 H.P. 46" ( 2004 )

    Re: Bad frame

    Quote Originally Posted by slickstick260 View Post
    I have a 265 johndeere lawn&garden tractor about a 1991 model. The front frame section is broke. I am wording what frames will work under it.Thanks for the info.
    Well Slick, you're shy some information here ! Are you planning to replace the "frame" and re-install ALL your components onto to the "new" frame, maybe you're thinking of welding a new section of frame on, please clarify, also, the IMPORTANT info is lacking, see example and provide as much info about your machine as possible, ( JD 265 is just your SERIES ) a few pics would help a great deal also. Finally, what is your plan thus far. Please help US to help YOU !!

    GET INFO.JPG


    Mower : Murray Select 46 " deck
    Model : 465306X8A
    Serial # : 733781D027
    Date of Mfg. : 2003/12/03

    Engine : Briggs & Stratton
    I/C V Twin
    21 H.P.
    Model : 4045A7
    Type : 0211 E1
    Code : 031104YG
    Family YBSXS . 7242VF 22844

  4. #3

    Join Date
    Nov 2014
    Posts
    10
    Location
    Georgia
    Mower
    John Deere

    Re: Bad frame

    Quote Originally Posted by Boobala View Post
    Well Slick, you're shy some information here ! Are you planning to replace the "frame" and re-install ALL your components onto to the "new" frame, maybe you're thinking of welding a new section of frame on, please clarify, also, the IMPORTANT info is lacking, see example and provide as much info about your machine as possible, ( JD 265 is just your SERIES ) a few pics would help a great deal also. Finally, what is your plan thus far. Please help US to help YOU !!

    GET INFO.JPG
    Well i plain to re install all the old components on the new frame.

  5. #4

    2,500 Post Club
    Boobala's Avatar
    Join Date
    Feb 2015
    Posts
    2,867
    Location
    Central Fl. about 2 hours from DAYTONA !
    Mower
    Murray Select 21 H.P. 46" ( 2004 )

    Re: Bad frame

    OK Slick I found this much so far, it looks to me like you can use a frame from any years from 1987 up to a 1994, ( NO guarantee) I'm not familiar with JD Mowers. check this info over to see if it's the same as yours, I would suggest you search any local mower junk-yards and look on craigs-list for a mower with a blown engine or trans. ( provided yours is good) or selling for parts, maybe even a local mower shop might have something,

    http://www.tractordata.com/lawn-trac...deere-265.html

    click on the various "boxes and items in "italics" for further info. .......... keep us up-dated Good Luck !! ..


    Mower : Murray Select 46 " deck
    Model : 465306X8A
    Serial # : 733781D027
    Date of Mfg. : 2003/12/03

    Engine : Briggs & Stratton
    I/C V Twin
    21 H.P.
    Model : 4045A7
    Type : 0211 E1
    Code : 031104YG
    Family YBSXS . 7242VF 22844

  6. #5

    Join Date
    Aug 2016
    Posts
    87
    Location
    Washington
    Mower
    jd425AWS, JD L120, JD GT262, JD LT160, JD LT150, JD L110, LX188

    Re: Bad frame

    Quote Originally Posted by slickstick260 View Post
    I have a 265 johndeere lawn&garden tractor about a 1991 model. The front frame section is broke. I am wording what frames will work under it.Thanks for the info.
    i think the 240,262,265,275,285 were all the same frame. The 320 was close, but Im not sure about it.

  7. #6

    Join Date
    Nov 2014
    Posts
    7,168
    Location
    Australia
    Mower
    Victa slashers & Push , Rover Rancher II's, Cox ( several ) & White LT120 + GT 200

    Re: Bad frame

    Is this the bit that is broken ?
    http://jdpc.deere.com/jdpc/servlet/c...ageServlet_Alt
    If so depending upon where it is broken, a simple weld might save a lot of time & effort.
    Engine out most welders should be able to do the job easily.

    Acording to the JD parts web site ( always dangerous ) the - 240, 245, 260, 265, 285 & 320 Lawn and Garden Tractors all ran the same frame
    The only difference appear to be the engine and tranny

Similar Threads

  1. Left rear wheel Leaning bad, found broken frame.
    By degutemax in forum Scag Forum
    Replies: 5
    Last Post: 10-16-2016, 08:40 PM
  2. Rusting car frame
    By X-man in forum The Front Porch
    Replies: 8
    Last Post: 08-04-2014, 01:13 PM
  3. Replies: 2
    Last Post: 09-08-2013, 10:10 PM
  4. Walk behind Snapper Hi Vac Bag frame
    By Crotext in forum Snapper Forum
    Replies: 2
    Last Post: 08-29-2013, 07:21 AM
  5. Hole in my frame
    By Koogan in forum Small Engine & Mower Repair
    Replies: 4
    Last Post: 05-02-2013, 08:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •