Simplecity
Forum Newbie
- Joined
- Dec 4, 2017
- Threads
- 1
- Messages
- 1
Good Evening All
Happy New Year
Working on a K301 D038515 Spec#47147C. The fuel pump arm is badly worn (gouged). Any leads on replacement parts? I have found a place in Maine that produces the internal parts (check valves/springs/gaskets), but I think I need more than that. Worst case scenario I can try to build up the arm with weld.
I know that there are replacement plastic pumps out there, but I would like to keep this as original as possible.
Thanks to all who respond.
Simplecity
Happy New Year
Working on a K301 D038515 Spec#47147C. The fuel pump arm is badly worn (gouged). Any leads on replacement parts? I have found a place in Maine that produces the internal parts (check valves/springs/gaskets), but I think I need more than that. Worst case scenario I can try to build up the arm with weld.
I know that there are replacement plastic pumps out there, but I would like to keep this as original as possible.
Thanks to all who respond.
Simplecity