Craig LeSieg
Forum Newbie
- Joined
- Sep 28, 2017
- Threads
- 1
- Messages
- 4
Hi everyone, this is my first time posting in any kind help forum, so I'm going to try to give as much info as I can.
I bought a used Snapper 2690980A with a Briggs & Stratton 42A707.
It started running good for a half hour to hour then quit, no noise, no warning, it just stopped. I would try to restart but I got nothing from turning the key, sometimes a whine, sometimes no noise. Battery shows 12v, but none the less I hooked it up to a charger overnight and the next day it started, and once again after half an hour it just quit. I tried to charge it over night again but got nothing. I let it set for 3 weeks (I was in the hospital) thought I'd check it so turned the key and it started right up, ran for half an hour and quit again. I decided to just check everything under the hood and found some wires/plugs that were not hooked up to anything. I've looked everywhere but can not find anything specific to my engine. I'm adding some pics and hopefully someone can help me.
Thanks in advance!
I bought a used Snapper 2690980A with a Briggs & Stratton 42A707.
It started running good for a half hour to hour then quit, no noise, no warning, it just stopped. I would try to restart but I got nothing from turning the key, sometimes a whine, sometimes no noise. Battery shows 12v, but none the less I hooked it up to a charger overnight and the next day it started, and once again after half an hour it just quit. I tried to charge it over night again but got nothing. I let it set for 3 weeks (I was in the hospital) thought I'd check it so turned the key and it started right up, ran for half an hour and quit again. I decided to just check everything under the hood and found some wires/plugs that were not hooked up to anything. I've looked everywhere but can not find anything specific to my engine. I'm adding some pics and hopefully someone can help me.
Thanks in advance!