The Wizard
Forum Newbie
- Joined
- Sep 28, 2017
- Threads
- 1
- Messages
- 5
I have done everything I can think of to correct a ZMaster that is not charging.
Stator is giving off greater than 27 volts
Checked rectifier with Ohm meter. Checks out OK
Took battery to have it checked, checks out OK
The ground from the battery to block and solenoid look OK.
With key on DC wire at rectifier is putting out 12.4 volts.
I just can't get 13-14 volts to the battery while running.
Stator is giving off greater than 27 volts
Checked rectifier with Ohm meter. Checks out OK
Took battery to have it checked, checks out OK
The ground from the battery to block and solenoid look OK.
With key on DC wire at rectifier is putting out 12.4 volts.
I just can't get 13-14 volts to the battery while running.