christophert
Member
- Joined
- Aug 1, 2017
- Threads
- 15
- Messages
- 37
I have rebuilt 2 Stihl Cutoff saws that were extremely abused (ran with no air filters, ran with too lean of air/fuel mixture for example..). I replaced the piston, jug, carbs, coils (firing intermittent) and the saws stubbornly refuse to start. Both are firing, have fuel going to the primer bulb, and will sometimes pop in the exhaust enough the pop the decompression valve. I had training on Stihl's but it was 20 years ago and these saws are a lot different than the ones I trained on to repair. Any help would greatly be appreciated!!!
Last edited: