Repairs Battery won't charge...

Amrac

Forum Newbie
Joined
Aug 2, 2017
Threads
2
Messages
6
Great! Thank you so much! I will get this done and be back with ya!
 

Bwells

Active Member
Joined
Apr 6, 2017
Threads
9
Messages
58
Amrac, were you able to do any testing?
 

Amrac

Forum Newbie
Joined
Aug 2, 2017
Threads
2
Messages
6
Haven't gotten testing done hopefully soon, I have a busy schedule at present! Thank you very much, almost there!
 

Amrac

Forum Newbie
Joined
Aug 2, 2017
Threads
2
Messages
6
Start by checking the AC output from the alternator.
There should be 2 wires coming out from under the flywheel that are the same size & colour, these are the AC feed from the alternator and they should go to a box of some sort with a single heavier wire coming out of it,
That is the DC feed to your battery
You should see 26V AC or better between the 2 wires that are the same colour when the engine is running.
Next check the DC volts on the other wire, you really need to disconnect it if it is low to double check but if it reads 13V or better between it and the engine case ( ground) it is fine and your problem is a break or short somewhere in that wire between the rectifier ( the box ) and the battery.

Get that done & get back to us

Between those 2 wires it reads O!
 

bertsmobile1

Lawn Royalty
Joined
Nov 29, 2014
Threads
64
Messages
24,647
well if you aint got any AC feeding into the recti frier then the stator is chips.
 
Top