hrdman2luv
Well-Known Member
- Joined
- Aug 23, 2014
- Threads
- 62
- Messages
- 345
31P777-0299-E1.. Carb number, Nikki 697216<< Number stamped on it.
Just changed the headgasket. Cleaned the carb out and changed the needle, bowl gasket (with the O ring). It running better than it did. But still rough. I noticed the oil seemed like it had some gas in it. But I'm fairly sure that was from the carb before the rebuild. I'll change that oil, after I get this problem solved.
Sorry if the sound isn't all that good. That popping is the back firing. Adjusted the valves at 4 & 6.
The headgasket I put on it yesterday, I'm pretty sure was a new one that I had installed on another engine, but took it back off even before that engine was even started.
Just changed the headgasket. Cleaned the carb out and changed the needle, bowl gasket (with the O ring). It running better than it did. But still rough. I noticed the oil seemed like it had some gas in it. But I'm fairly sure that was from the carb before the rebuild. I'll change that oil, after I get this problem solved.
Sorry if the sound isn't all that good. That popping is the back firing. Adjusted the valves at 4 & 6.
The headgasket I put on it yesterday, I'm pretty sure was a new one that I had installed on another engine, but took it back off even before that engine was even started.