Honda hf1211 wiring

C

Christian1994

Forum Newbie
Joined
Aug 10, 2017
Threads
1
Messages
1
Was wondering.if anyone can help I have a honda hf1211 second hand and I need a diagram of the ignition barrel its a 5 pin and I have a red wire/ a white/ a brown/ two blues into the same head and a black any ideas and many thanks to anyone who helps 150238950590248420229.jpg
 
EngineMan

EngineMan

Lawn Addict
Joined
Jun 12, 2012
Threads
9
Messages
2,275
I believe I can help you out on four of the five wires, but I would check to see where the wires go....!

White on S on the key switch from the PCB, Brown on the L on the key switch from the PCB, the two Blues goes on B on the key swtich one from PCB and the other goes to the relay, Black should be GND, the red wire is not showing on the wiring diagram anywhere near the key switch.


Here is a link to the wiring diagram...... http://www.motoculture-jardin.com/forum/detail.php?forumid=3&id=20832&p=1#181247
 
J

juddycrust

Forum Newbie
Joined
Sep 25, 2023
Threads
0
Messages
1
EngineMan said:
I believe I can help you out on four of the five wires, but I would check to see where the wires go....!

White on S on the key switch from the PCB, Brown on the L on the key switch from the PCB, the two Blues goes on B on the key swtich one from PCB and the other goes to the relay, Black should be GND, the red wire is not showing on the wiring diagram anywhere near the key switch.


Here is a link to the wiring diagram...... http://www.motoculture-jardin.com/forum/detail.php?forumid=3&id=20832&p=1#181247
Click to expand...
Just tried it on my ignition switch , worked ok. Thanks
 
You must log in or register to reply here.

Footer Links 1

Top