tkruger
Member
- Joined
- Aug 8, 2017
- Threads
- 12
- Messages
- 21
I bought a Wheel Horse 8-25 for $30 that is missing a tie rod. It is about $40 to get one. Anyone have a recommended way of just making one. This is just a straight bar with a ball joint at each end. I have seen adjustable kits for go karts that are this length for >$15.
Bought this as a non-runner for $30. Set a goal of having less than an additional $50 into it to get it cutting. So far I need a tube for the front tire, tie rod, oil change, fuel filter and plug. All else looks good including the belts and blade. I already had a battery.
I am not attempting to be cheep just this is more of a can I do it thing than a for permanent use mower, it is a little small.
Bought this as a non-runner for $30. Set a goal of having less than an additional $50 into it to get it cutting. So far I need a tube for the front tire, tie rod, oil change, fuel filter and plug. All else looks good including the belts and blade. I already had a battery.
I am not attempting to be cheep just this is more of a can I do it thing than a for permanent use mower, it is a little small.