8 HP Briggs and Stratton problems with surging and almost dieing

Vortec325

Member
Joined
Aug 8, 2017
Threads
6
Messages
44
  • / 8 HP Briggs and Stratton problems with surging and almost dieing
Feels like it has good compression but if I pull it slow I can almost hear some leaking out of the carb .
 
Joined
Jul 22, 2017
Threads
21
Messages
2,154
  • / 8 HP Briggs and Stratton problems with surging and almost dieing
Ok that's what I needed to know. Let us know what the key looks like.
 

Vortec325

Member
Joined
Aug 8, 2017
Threads
6
Messages
44
  • / 8 HP Briggs and Stratton problems with surging and almost dieing
I pulled the flywheel off and the key looks fine
 

Vortec325

Member
Joined
Aug 8, 2017
Threads
6
Messages
44
  • / 8 HP Briggs and Stratton problems with surging and almost dieing
Finally got a chance to watch your video , your right Bou. The intake valve was fine but the exhaust valve isn't sitting in the seat right, or the seat has worked it's way up . Valve has like .022 of lash
 

Vortec325

Member
Joined
Aug 8, 2017
Threads
6
Messages
44
  • / 8 HP Briggs and Stratton problems with surging and almost dieing
I've got the head off, looks like the exhaust valve isn't sitting in the seat all the way . Pulled the valve and cleaned the carbon off of it with emery cloth and lapped the valve in . Got the valve lash better but still looks like the exhaust valve isn't seating right
 

Vortec325

Member
Joined
Aug 8, 2017
Threads
6
Messages
44
  • / 8 HP Briggs and Stratton problems with surging and almost dieing
Looks like it , sitting about the same as the intake valve seat . I tried wiggling it around and it isn't loose . I'll take a picture for yah here in a minute
 
Top