I was recently given the above pressure washer. The previous owner said that the pump I leaking in several places. There are no obvious cracks to the pump so I am assuming that it is o rings and seals.
Here are the particulars on the machine.
Troy Bilt GC 160 with 5.0 hp Honda engine. 2500 PSI 2.5 GPm.
I looked at trying to separate the pump from the motor but the bolts are to close to the pump housing to get my tool into the bolt. Believe they are torx bolts but could be just regular Allen head bolts. Does anybody have any information on this machine or experience with it to tell me what I have exactly and where to go to find parts?
Thank you.
Here are the particulars on the machine.
Troy Bilt GC 160 with 5.0 hp Honda engine. 2500 PSI 2.5 GPm.
I looked at trying to separate the pump from the motor but the bolts are to close to the pump housing to get my tool into the bolt. Believe they are torx bolts but could be just regular Allen head bolts. Does anybody have any information on this machine or experience with it to tell me what I have exactly and where to go to find parts?
Thank you.