I have a Husqvarna, YTH1542XP, Kawasaki FH430V and have been having various problems with it.
Here is the history: It would continue to run after turning the key off.
Here is the history: It would continue to run after turning the key off.
- I rebuilt the carb, no change.
- Replaced the carb and was really hard to start & it would stall.
- I replaced the spark plugs, coils, & fuel pump.
- Then it would start and would run about 15 minutes and stall as if it ran out of gas.
- Loosened the fuel cap with no change.
- I cleaned the carb and when I tried to start it, it would crank but then it wouldn't stop when I turned ignition key off and I had to disconnect negative battery cable to get it to stop.
- I replaced the solenoid & ignition switch.
- Now it cranks but won't start.
- Stator Coil resistance tests good.