1997 john deere sabre 18 hp vtwin
- Thread starter bigmiketx
- Start date
bertsmobile1
Lawn Royalty
- Joined
- Nov 29, 2014
- Threads
- 64
- Messages
- 24,705
It is either a brake spring or a tension arm return spring
bertsmobile1
Lawn Royalty
- Joined
- Nov 29, 2014
- Threads
- 64
- Messages
- 24,705
If you want any more help, I need the model numbers off the ID tag on the mower so I can look it up.
From the size of the spring it will either be on the spindle brake in which case there should be 2 of them or it goes against the engagement spring to aid the dissengagement of the blades.
If you looks closely at the deck there will be scuff marks where the spring has been rubbing the paint.
From the size of the spring it will either be on the spindle brake in which case there should be 2 of them or it goes against the engagement spring to aid the dissengagement of the blades.
If you looks closely at the deck there will be scuff marks where the spring has been rubbing the paint.
reynoldston
Lawn Pro
- Joined
- May 23, 2011
- Threads
- 92
- Messages
- 5,705
Its been awhile but as I remember as you sit on the seat on the left side there is a lever that adjust the mower height. The lever go's through a plastic insert and this spring is the levers detent.