Deck uneven when set at high level.

anthonyk

Forum Newbie
Joined
Jul 10, 2017
Threads
3
Messages
9
HI i have a Husqvarna CTH 140 Twin 36" ride on.

When I set the height of the deck to a high level the deck is lower on the right hand side then the left by an inch or more. I have followed the instructions given in the manual on how to correctly set the level of the deck, but the problem is still there.

As I lower the height using the adjusting wheel it levels out correctly, but the higher I set it the cutting level its very uneven.

Any ideas. is it just a setting problem or could something be broken.

Also where can I get a footrest LH No 532 18 10-57
 

BlazNT

Lawn Pro
Joined
Apr 26, 2012
Threads
28
Messages
6,973
Do a web search for this part number 532181057. You will find it.
I would look for a broken part on the deck lift.
 

anthonyk

Forum Newbie
Joined
Jul 10, 2017
Threads
3
Messages
9
Do a web search for this part number 532181057. You will find it.
I would look for a broken part on the deck lift.

I have, very hard to get. Looking for a broken part will mean removing the deck. Best get to work.
Thanks
 

bertsmobile1

Lawn Royalty
Joined
Nov 29, 2014
Threads
64
Messages
24,647
Check the discharge chute.
They can snag the deck.
Those rear discharge decks are a bit of a problem with that.
The intermediate chute comes apart then gets caught on a corner as the height changes
 

anthonyk

Forum Newbie
Joined
Jul 10, 2017
Threads
3
Messages
9
Do a web search for this part number 532181057. You will find it.
I would look for a broken part on the deck lift.


100% right, turns out a weld on the lever that rises and drops the deck was broke. Bit of a job getting it out but re-welded and back in again. Happy Days.

Thanks for feedback, still looking for footrest.
 
Top