I modified that stupid short shift lever by adding about 7 inches of 3/8 ID steel tube. I welded a 3/8 threaded rod about 3 inches to the end and screwed the handle on that. The steel tube was tight enough on the shifter but I added a little blue rtv just for the heck of it. 
Now I would like to add wheels to the deck to help with scalping but I don't know if anyone has done this or if the deck floats enough to be of benefit.
Any help would be appreciated.:confused2:
Now I would like to add wheels to the deck to help with scalping but I don't know if anyone has done this or if the deck floats enough to be of benefit.
Any help would be appreciated.:confused2:
Last edited: