Engine Craftsman R1000 quits running when hot??

cbpa40

Forum Newbie
Joined
Jun 11, 2017
Threads
1
Messages
1
2014 Craftsman R1000, #247.290000 - Runs rough when it gets hot after about 20 minutes then quits. Will restart and run after it cools down, I replaced spark plug, fuel filter, ignition coil, cleaned carb, drilled a hole in the gas cap to prevent vapor lock, and tested the carb solenoid which is working. I am stumped!
 

bertsmobile1

Lawn Royalty
Joined
Nov 29, 2014
Threads
64
Messages
24,702
runs rough, runs bad , sounds funny , not working proper.
We all know what you mean, but it is no use when trying to diagnose your problem.
You are there.
I am 16,000 km away so I really can not hear , see or smell your mower so it makes life a bit hard.
Not knowing what engine you have in your mower makes it harder still.
 

hrdman2luv

Well-Known Member
Joined
Aug 23, 2014
Threads
62
Messages
345
2014 Craftsman R1000, #247.290000 - Runs rough when it gets hot after about 20 minutes then quits. Will restart and run after it cools down, I replaced spark plug, fuel filter, ignition coil, cleaned carb, drilled a hole in the gas cap to prevent vapor lock, and tested the carb solenoid which is working. I am stumped!


If it has a fuel solenoid, that could be your problem. Take it off, snip the nipple off of it. Then reinstall it.
 

Boobala

Lawn Pro
Joined
Feb 15, 2015
Threads
200
Messages
7,000
runs rough, runs bad , sounds funny , not working proper.
We all know what you mean, but it is no use when trying to diagnose your problem.
You are there.
I am 16,000 km away so I really can not hear , see or smell your mower so it makes life a bit hard.
Not knowing what engine you have in your mower makes it harder still.


A little information is needed here , see example ..

GET INFO.JPG
 

CWatters

Active Member
Joined
Apr 25, 2017
Threads
7
Messages
56
Ah just noticed you said "coil" not "coils" so I guess your motor only has one not two coils like mine. In which case it probably doesn't have the diodes that appear to be causing the problem I had.
 
Top