Hi guys, my first post here.
I always done my own maintenance on my Craftsman rider.
I just cant get her up and running this season.
Fresh gas, new plug, has spark, adjusted the valves, cleaned carb, jets, and jet channels, and still nothing.
the float isnt stuck, the float valve is closing.
When you pull the spark plug and turn the key the motor turns over great.
When you put the plug back in, it just does a small 1/4 turn and stops.
I thought that meant the valves were out of spec so i adjusted them to .004" intake and .008" exhaust.
still same result....
oh and the battery is good, and is connected to another battery to help while working on it.
Im stumped. :frown:
I always done my own maintenance on my Craftsman rider.
I just cant get her up and running this season.
Fresh gas, new plug, has spark, adjusted the valves, cleaned carb, jets, and jet channels, and still nothing.
the float isnt stuck, the float valve is closing.
When you pull the spark plug and turn the key the motor turns over great.
When you put the plug back in, it just does a small 1/4 turn and stops.
I thought that meant the valves were out of spec so i adjusted them to .004" intake and .008" exhaust.
still same result....
oh and the battery is good, and is connected to another battery to help while working on it.
Im stumped. :frown: