Repairs 2008/2009 Xcaliber 3366 Broken back wheel stud

J&SRailway

Forum Newbie
Joined
Apr 27, 2017
Threads
2
Messages
6
I have a broken wheel stud on the back right tire of my Xcaliber. it is the Industrial zero turn. I was wondering if there was a way to remove that broken stud. Or will I have to buy a new assembly? The stud is broken off but there is still room to put a lugnut on it if I can get the stud fixed
 

reynoldston

Lawn Pro
Joined
May 23, 2011
Threads
92
Messages
5,705
All the wheel studs I have ever changed are just press fit. Remove old with a punch and install the new one with the wheel nut.
 

J&SRailway

Forum Newbie
Joined
Apr 27, 2017
Threads
2
Messages
6
Which direction are the lugs pressed in?
 

bertsmobile1

Lawn Royalty
Joined
Nov 29, 2014
Threads
64
Messages
24,647
From the opposite side to the wheel
 

J&SRailway

Forum Newbie
Joined
Apr 27, 2017
Threads
2
Messages
6
What is the best way to get the outer drum off of the wheel motor so I can drive the lug bolts out? It is frozen on the motor. I have a puller on it now and have also heated it to get it to try and budge
 

BlazNT

Lawn Pro
Joined
Apr 26, 2012
Threads
28
Messages
6,973
Make sure the brake is released. That is the only thing that could be holding it on.
 

J&SRailway

Forum Newbie
Joined
Apr 27, 2017
Threads
2
Messages
6
The shaft that is holding the hubs on are tapered, Found this out by trial and error, It takes a special puller to remove a hub/ pulley with a tapered shaft like this.
 
Top