devenrocks
Forum Newbie
- Joined
- Mar 31, 2015
- Threads
- 2
- Messages
- 4
Hello All,
I have a Troy Bilt Pony with a 17.5 Briggs that will only spin once then freeze then spin then freeze over and over again. I have put a new solenoid and a new starter and using the key would do this. I jumped it directly on the starter and it started right up about 3 times this year. Now even jumping from starter does the same thing.
I know it must be a ground problem because it was working jumping the starter but now that's not even working. I used one of those jump starters on the battery and used jumper cables to starter and no change. I've done a valve adjustment on it and it's perfectly where they need to be.
I am completely lost and not sure what to do now. Any help is very appreciated.
I have a Troy Bilt Pony with a 17.5 Briggs that will only spin once then freeze then spin then freeze over and over again. I have put a new solenoid and a new starter and using the key would do this. I jumped it directly on the starter and it started right up about 3 times this year. Now even jumping from starter does the same thing.
I know it must be a ground problem because it was working jumping the starter but now that's not even working. I used one of those jump starters on the battery and used jumper cables to starter and no change. I've done a valve adjustment on it and it's perfectly where they need to be.
I am completely lost and not sure what to do now. Any help is very appreciated.