lawnboy 10323, ser. 24000.....

EdBrown

Active Member
Joined
Jun 3, 2012
Threads
26
Messages
56
Have had this LB for some time. Did not run it last year. Started up and runs well, but self-propelled not working.
Is it adjusted in the SP cable, at the top of the mower? Seems like not enough tension when bale is pulled up. Thanks very much.
Ed
 

lewb

Well-Known Member
Joined
Jun 4, 2013
Threads
40
Messages
275
Belt slipping as it is worn out? Also the friction rubber bushing can wear out, shaft will turn but wheels will not. The bushing are on each wheel, usually one will work, not likely both failed at the same time.
 

jp1961

Well-Known Member
Joined
Jul 22, 2013
Threads
39
Messages
785
Hi Ed,

Did the spring at the end of the cable come off the stamped steel bracket? It is possible that happened.

You've got a 2004 10323, the last year made.

Regards

Jeff
 
Top