Hi guys. I bought 3 non running mowers recently and have been robbing parts already. I'm trying to get the newest of the 3 running. It had no spark but had good compression. Put in new coil and now getting spark. Took carburetor off and cleaned it. I noticed the bottom reed valve isn't sealing up very good on one side. I thought I would take the reed valve out of another engine that the piston and cylinder wall was messed up on. My question is about sealing up the engine. I got a tube of anaerobic gasket sealer. Do you coat the entire mating surfaces with the gasket maker and how thick do you apply the goo?
This is a 1993 model 10415 push mower. It is just about the dirtiest mower I've ever seen. It looks like it set in a very damp place. Everything is really corroded
and the green paint is peeling off in big flakes. Thanks for any help with this.
Jerry
This is a 1993 model 10415 push mower. It is just about the dirtiest mower I've ever seen. It looks like it set in a very damp place. Everything is really corroded
and the green paint is peeling off in big flakes. Thanks for any help with this.
Jerry