Tricks and tips for removing/dealing with a snapped exhaust stud still in engine block farthest from access points, has anyone got one of these out without pulling the whole engine out to access the stud with a drill?
Photos are each taken into the mouth of the two exhaust ports, you can see the snapped stud almost flush with the block. Problem like every time is access space, this stud is closest to the driver's seat. With only 3 to 3.5 inches gap between the stud and the base plate of the mower frame.middle picture is just for comparison as that is the exhaust port farthest away from the driver's seat easy to get at.
Photos are each taken into the mouth of the two exhaust ports, you can see the snapped stud almost flush with the block. Problem like every time is access space, this stud is closest to the driver's seat. With only 3 to 3.5 inches gap between the stud and the base plate of the mower frame.middle picture is just for comparison as that is the exhaust port farthest away from the driver's seat easy to get at.