Results 1 to 9 of 9
  1. #1

    Join Date
    Mar 2017
    Posts
    4
    Location
    United States
    Mower
    Ariens

    Question John Deere 522 auger bushings

    Happy Spring and back to winter.

    It seems the John Deere parts diagrams that I have seen online are not correct for the 522 that I have. I lost one of the auger bushings and my local JD dealer is no help. The unit I have has a rather large bushing with a flange that fits in the end plate and a C-clip goes on the end of the shaft to hold it in place.

    The JD diagrams shows the shaft that takes the clip but not the proper bushing. Anybody have any Ideals?

  2.  

  3. #2

    2,500 Post Club
    BlazNT's Avatar
    Join Date
    Apr 2012
    Posts
    3,182
    Location
    Missouri
    Mower
    RZ5424

    Re: John Deere 522 auger bushings

    Is this the part number you are looking at? PT9642
    Chuck
    We Do Not Stop Playing When We Grow Old
    We Grow Old If We Stop Playing

  4. #3

    Join Date
    Mar 2017
    Posts
    4
    Location
    United States
    Mower
    Ariens

    Re: John Deere 522 auger bushings

    Yes but it does not look like that and it is not plastic. I'm looking for a larger metal bushing that is held on with a clip on the shaft. If you look at the auger shaft for the 522 you can see it is not threaded for a nut but has a groove for the clip. The 520 and 524 appear to just take the flanged bushing held on by 3 bolts. I fabricated a bushing that held-up through 1 snow, its not as sturdy as the original. I have also searched other sites showing very similar bushings but not with all the same dimensions. The flanged bushing I am looking for has the following dimensions: 0.75"ID, 1.25"OD, a flange on one end 1.5"OD, length 1". The 1.25"OD has 2 flats that keep it from spinning in the housing, I don not have the thickness at the flats. It's graphite impregnated. Any ideas or suggestions is greatly appreciated!

  5. #4

    2,500 Post Club
    BlazNT's Avatar
    Join Date
    Apr 2012
    Posts
    3,182
    Location
    Missouri
    Mower
    RZ5424

    Re: John Deere 522 auger bushings

    I found the proper one. Part number PT11831. Not avalible from the site I found it. I found it here http://parts.circletractor.com/oempa...240G1402000010
    Chuck
    We Do Not Stop Playing When We Grow Old
    We Grow Old If We Stop Playing

  6. #5

    Join Date
    Mar 2017
    Posts
    4
    Location
    United States
    Mower
    Ariens

    Re: John Deere 522 auger bushings

    Thanks Chuck but I don't think that's the correct one either. Part number PT11831 is the same as the bushings inside the gear case. I think the bushing I'm looking for will not fit inside the gear case.

  7. #6

    2,500 Post Club
    BlazNT's Avatar
    Join Date
    Apr 2012
    Posts
    3,182
    Location
    Missouri
    Mower
    RZ5424

    Re: John Deere 522 auger bushings

    So you are looking for the bushing on the outside of the ogger?
    Chuck
    We Do Not Stop Playing When We Grow Old
    We Grow Old If We Stop Playing

  8. #7

    2,500 Post Club
    BlazNT's Avatar
    Join Date
    Apr 2012
    Posts
    3,182
    Location
    Missouri
    Mower
    RZ5424

    Re: John Deere 522 auger bushings

    What I found for the outside og the ogger is 2 washers and a snap ring. I circled them in red.
    johndeere.jpg
    1 R27434 SNAP RING | 527 $2.25
    2 24H448 WASHER | 25/32in. X 1-1/8in. X 0.090in. $1.00
    Chuck
    We Do Not Stop Playing When We Grow Old
    We Grow Old If We Stop Playing

  9. #8

    Join Date
    Mar 2017
    Posts
    4
    Location
    United States
    Mower
    Ariens

    Re: John Deere 522 auger bushings

    Thanks Chuck but that's not it either. As I said in the beginning the drawings are not correct. I'm looking for other alternatives. Thanks again.

  10. #9

    2,500 Post Club
    BlazNT's Avatar
    Join Date
    Apr 2012
    Posts
    3,182
    Location
    Missouri
    Mower
    RZ5424

    Re: John Deere 522 auger bushings

    19A PT11806 BEARING | End Serial: 100000 (METAL)
    Same as the part number I gave you first only metal.
    Chuck
    We Do Not Stop Playing When We Grow Old
    We Grow Old If We Stop Playing

Similar Threads

  1. Buying Advice 2002 John Deere LX277 vs 2016 John Deere D155
    By Willie742 in forum John Deere Forum
    Replies: 2
    Last Post: 06-01-2016, 02:58 AM
  2. John deere 522 snowblower question
    By Ejd148 in forum Snow Removal
    Replies: 2
    Last Post: 12-21-2014, 09:59 PM
  3. John Deere 522 restoration
    By Ejd148 in forum John Deere Forum
    Replies: 3
    Last Post: 12-11-2014, 07:43 PM
  4. difference between John deere la135 and john deere 135
    By duster in forum John Deere Forum
    Replies: 1
    Last Post: 05-23-2013, 01:00 PM
  5. Hunting the right lawnmower..John Deere LTR 180 vs John Deere LX178 vs John Deere 332
    By janbhauge in forum Mower & Equipment Buying & Pricing
    Replies: 2
    Last Post: 05-24-2012, 08:51 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •