Hello All - having some trouble with my HUSKEE (MTD) 11A-B2M7031 walk behind mower. It has a HUAYI carb and it doesn't want to start. This model has no choke to adjust, and throttle selector. I have been playing with this thing all day and am at my wits end. HELP!! I got leaves to bag!!
This is what I have done so far:
Any info is appreciated.
This is what I have done so far:
- I have drained the tank, rinsed out with a little gas.
- Took off the carb and bowl, removed and checked the float and needle (that seems ok - never saw the spring and needle in one piece before).
- Sprayed carb cleaner into the ports, then took some fine welding wire into each of the ports.
- Through dismantle and reinstall I can tell the fuel flows through the line, fills the bowl and will start when I spray a little fuel into the carb - but then it seems like it isn't sucking up any gas - with that being said I have also ruled out the plug
- I also took out the idle port on top of the carb and sprayed it out with carb cleaner and tried to send a metal wire from a wire brush through the port but it seems like a really small opening
Any info is appreciated.