Ok guys, I checked my connections, charged the battery and still have no answer. I can loosen the bolts on the starter and slide it back so when activated by the key switch, the starter kicks the bendix out and appears to spin fine. I tightened the bolts and it does the same thing, just out and won't spin the flywheel. Once.., it did spin the flywheel(motor) and I stopped it. I hit the key again and it spun the motor again. (This was with the plugs out)
So..., I'm thinking I'm good to go. I put the spark plugs back in and same results, won't spin motor.Hit the key, bendix kicks out, but starter won't spin the motor over. Is the starter just to weak to spin the motor, bad bendix, etc. I have noticed that the bendix drive doesn't won't to go back down all the way at times. So could the bendix be binding up...?
Very frustrating. Once again, help appreciated. Thanks Mike