On my HM-80: while doing a small refurb I found the exhaust valve guide had slipped about 1/8" into the breather area so the exhaust valve won't seat properly.
I tried coaxing it back into position with a C-clamp but it didn't budge and I'm having trouble finding a bigger C-clamp that will fit into the breather.
Any tricks/ideas? Have you heard of this before?
I tried coaxing it back into position with a C-clamp but it didn't budge and I'm having trouble finding a bigger C-clamp that will fit into the breather.
Any tricks/ideas? Have you heard of this before?