series 760-770 won't start

tyson1790

Forum Newbie
Joined
Aug 25, 2012
Threads
4
Messages
5
I have a MTD that on the manual just says series 760-770. This was given to me, so I don't know a lot about it. I have tried starting it, new battery, new solenoid and fresh gas. When I go to start it, there is just a clicking sound coming from the area of the solenoid, under the seat, left corner. It was doing that, so I thought that maybe the new solenoid was bad or I had hooked it up wrong and shorted it out or something, so I replaced it and still just get a clicking noise. Any ideas as to what to try next to get this thing going?
 

Rivets

Lawn Royalty
Joined
Mar 11, 2012
Threads
55
Messages
14,741
Check your grounds, both battery cable to chassis and solenoid to chassis. If you have a three post solenoid, the solenoid case is the ground and you must make sure that it is mounted tight to a clean surface.
 

bertsmobile1

Lawn Royalty
Joined
Nov 29, 2014
Threads
64
Messages
24,700
We really need the engine make and numbers.
In the mean time pull out the spark plug(s) and try to rotate the engine by hand.
 
Top