Need Help Please MZT 52

M

Mikel1

Well-Known Member

Joined

Jul 21, 2013

Threads

10

Messages

897

• Jul 18, 2015 / Need Help Please MZT 52

• #11

Okay, I would make sure brake switch is pressed all the way in.

 

D

DAJOKER69

Member

Joined

Jun 18, 2015

Threads

3

Messages

26

• Jul 18, 2015 / Need Help Please MZT 52

• #12

Roger I did. I even put a small piece of shim on it to make sure it was pushing in all the way

 

M

Mikel1

Well-Known Member

Joined

Jul 21, 2013

Threads

10

Messages

897

• Jul 18, 2015 / Need Help Please MZT 52

• #13

Okay. Did you test the fuses or just take them out and look at them? Do you have a multimeter?

 

D

DAJOKER69

Member

Joined

Jun 18, 2015

Threads

3

Messages

26

• Jul 18, 2015 / Need Help Please MZT 52

• #14

I just took the 20 amp out and looked at it. I have a multimeter. I could not find the 7.5 amp.

 

M

Mikel1

Well-Known Member

Joined

Jul 21, 2013

Threads

10

Messages

897

• Jul 18, 2015 / Need Help Please MZT 52

• #15

I would verify that you have 12+V to the ignition switch. If that is good then you are going to have to trace the S terminal(ignition switch) wire looking to see where the 12+V drops off while trying to start. Since it goes to the pto switch first then check voltage on the S terminal wire leading to then find the pto switch wire with voltage going to the next switch. Happy hunting

 

serelaw

Well-Known Member

Joined

Aug 5, 2013

Threads

2

Messages

103

• Jul 18, 2015 / Need Help Please MZT 52

• #16

Try pulling the red blade engage button up and down several times
with the key held on. Mine did that and it was the solenoid.

 

D

DAJOKER69

Member

Joined

Jun 18, 2015

Threads

3

Messages

26

• Jul 18, 2015 / Need Help Please MZT 52

• #17

serelaw said:

Try pulling the red blade engage button up and down several times
with the key held on. Mine did that and it was the solenoid.

Click to expand...

I tried the pto switch technique that you are talking about and that didnt work did the same thing with the brake. No luck. I tried to jump the hot side of the solenoid to the yellow wire post and nothing happened. I checked the battery and it has 12 volts.

 

B

Brian902

Member

Joined

May 23, 2014

Threads

3

Messages

32

• Jul 18, 2015 / Need Help Please MZT 52

• #18

There is a 10 amp fuse as well.





This is something else.



Can't find anything the shows the 10 amp fuse. Looked in all the manuals on the site.

 

Last edited: Jul 18, 2015

M

Mikel1

Well-Known Member

Joined

Jul 21, 2013

Threads

10

Messages

897

• Jul 18, 2015 / Need Help Please MZT 52

• #19

DAJOKER69 said:

I tried to jump the hot side of the solenoid to the yellow wire post and nothing happened.

Click to expand...

Is this yellow wire connected to a tab on the solenoid?

 

D

DAJOKER69

Member

Joined

Jun 18, 2015

Threads

3

Messages

26

• Jul 18, 2015 / Need Help Please MZT 52

• #20

Mikel1 said:

Is this yellow wire connected to a tab on the solenoid?

Click to expand...

yes it is