We Bought out a 40 Year Old Auhtorized lawn-Boy Dealership this evening

Hammerdown

Member
Joined
Oct 23, 2013
Threads
6
Messages
49
  • / We Bought out a 40 Year Old Auhtorized lawn-Boy Dealership this evening
Hello Guy's
I heard last week that a 40 Year old Lawn-Boy dealership was closing it's door's so I followed up on it. I got a call the other day from the new owner and he told me that he had boxed up all of the Factory Lawn-Boy NOS O.M.C. Part's and was holding them for me to see, so This evening my son in law and I bought the complete Lawn-Boy Inventory of NOS O.M.C. Original Lawn-Boy made parts we went in halves on the entire Inventory. I have to do a detailed complete part inventory as there is "Tonage" in these Huge boxes that we brought home with us but I did see a Brand new F-series complete engine as well as a whole Box of self Propelled wheel's, Mower Blades and carburetor Parts. There are several Grass Bags and the brackets that hold and I have several deck chute Plugs or baffles to direct the blown grass, as well as recoil Part's, and many many more Hard to find NOS Lawn-Boy internal engine parts. I even spotted some NOS Brick top engine parts there are recoils. air breathers and such. I will do a complete Inventory tomorrow after noon and list what I have tomorrow evening, so if you need or want New In the Original Box Lawn-Boy NOS O.M.C. Brand Parts we sure got Plenty them. Stay Tuned to this Thread for the Inventory List and prices, Please be Paitent it will take us a while to do the complete Inventory as this is at Least 40 Year's worth of authorized Lawn-Boy dealer's Parts that we have to go through...All I ask is that You Guy's Dont Blast me with a Huge Grocery List here until we find out Exactly What we have to offer you are the very first guy's to be notifird about this as well, don't worry there is Plenty for everyone to get in on this super deal...:fing32:. Regards, Hammerdown
 

Two-Stroke

Lawn Addict
Joined
May 7, 2010
Threads
23
Messages
1,594
  • / We Bought out a 40 Year Old Auhtorized lawn-Boy Dealership this evening
That sounds like quite a find. :thumbsup:

Are you going to sell on eBay? That might be the best way to reach the largest audience and get the best price. But then eBay takes a big cut.

I hope you find time to post some pictures of all these goodies. :cool:

Are you in East Tenn?
 

Hammerdown

Member
Joined
Oct 23, 2013
Threads
6
Messages
49
  • / We Bought out a 40 Year Old Auhtorized lawn-Boy Dealership this evening
That sounds like quite a find. :thumbsup:

Are you going to sell on eBay? That might be the best way to reach the largest audience and get the best price. But then eBay takes a big cut.

I hope you find time to post some pictures of all these goodies. :cool:

Are you in East Tenn?

Hello Two Stroke
I am in East Tennessee I live in Knoxville. Our Plan is to offer the parts to guys on some Internet forums first. if they do not sell well we will then Place them on E-bay. I feel by doing that it will give guy's on the forums I am a member of first chance on some really hard to find Nice Parts. We will be shipping through one of the main carrier's either Fed-X or UPS and Payment will be accepted through Pay-Pal or Postal Money orders. I will have a list of the Inventory completed late today or tomorrow so Keep tuned if you need part's it is a Huge Bunch of parts so it is going to take a while to see just waht all we have. Regards, Hammerdown
 

Hammerdown

Member
Joined
Oct 23, 2013
Threads
6
Messages
49
  • / We Bought out a 40 Year Old Auhtorized lawn-Boy Dealership this evening
Hello All
I spent most of the last Two day's going through our complete inventory my son in law helped me go Through the entire inventory and list the items and I spent all day yesterday looking up all of the part number's to see what the current retail prices of the parts are. I based most of the part's prices at a 50 % Less price than that of current retail prices of these parts and the part's offered now that are currently being sold are NOT Original OMC Lawn-Boy Brand parts Our's are all OMC Lawn-Boy Parts. Most of them are in their original boxes or have been placed into envelope's marked with the parts numbers. There is a hand full of part's that were loose that I did not recognize, I will at a Later time Get them into a Pile and show good digital picture's of them and will leave it up to you guy's to identify what they are and what they fit. Our Prices are set I feel at a 50 % cost of what the current one's are going for we are very fair on our prices, you are not going to find some of these Part's any More as many of them have been discontinued yet I kept the prices at least 50 % of what current new prices are now to be fair here.




Here is how we are going to do this. I will Gladly Accept Pay-Pal or a Postal Money order for payment of the part's. I will include my Pay-Pal Link for payment at the end of this message. If you do not have a Pay-Pal account I will accept a Postal Money order Only but your part's will Not be packed or shipped until the money order arrives. I will let everyone know when their part's are being shipped. For the smaller part's I will use the U.S. Postal service. We will be utilizing their flat rate Boxes as that is the easiest cheapest way to ship items. There will be No Shipping of Part's that do not total at Least $10.00 I have to set a lower limit as I do not want to run down to the post office wait in line and such for say two air cleaner wing Nut's, or Four Bent Handlebar washers here. I do not want to sound rude but due to the High Volume of part's we have to offer I will Not have time to do small quantities. There will not be any discount's as far as volumes of part's go, I figure our prices are at Half being 50% Lower of what the current retail rates are so you are certainly getting a good deal and the bottom line is you can Not Get any Current OMC Lawn-Boy Brand parts these are all Older high quality Part's most of them made before Lawn Boy was sold to Toro. There are some Toro Branded part's but those ones are very early on with dates on the shipping boxes of the early 2000-2004 time span. All Part's are listed with Good Lawn Boy Part Numbers. The one's that have been Discontinued are marked and noted as such. There is a small amount of Part's that were made by Steen's and those part's will be marked as such.




ATTN: Entrepreneur's & For The Guy's that have to have it all, I am offering all of these Part's as a one time package deal if someone decides to Buy them and re-sell them that will be up to them They are Now Offered at a cost savings of at least a 50% Less cost of what the current Retail prices are of Much cheaper made Inferior parts of today so my Buy it now price is Firm and Fair with Lot's of Room to make much More money on these Part's so, if someone does buy it all in one huge lot, there will be no Further separating or selling of any parts that we have, Once I get word of that kind of Transaction. If You resopnd and pay for your part's Prior to someone wanting to buy the entire lot, Don't worry your parts will be Boxed & shipped to you regardelss of the buy it now offer I am straight up and will not take advantage of anyone here. :fing32: On the Other hand, If you got a Pocket Full of Money and want to make a Lot More Listing & selling this stuff On Evil-Bay here is your Big Chance to get in on it, Simply E-mail me about this by Clicking on my Pay-Pal Link below it is my actual E-mail address be sure to Place "Buy all of the Lawn Boy parts Now" in the caption line as I get a Lot of spam mail that I don't bother with. and we will go from there about cost and shipping charges of all of the parts. During this sale of the parts I only ask that everyone be Very Patient when placing an order for their parts. I am in and out during the day so I will check my E-mails and such Occasionally but I have other things going on in my life, so I will do my best to answer all as quick as I can and get the part's Located, Boxed and shipped the same day as I am paid or the following morning if the payment is made after our Post office has closed for the day. The larger Parts such as the NOS F-Engine short block that we have to offer as well as the D-Engine Block will be shipped through UPS or Fed-X as well as the Grass bags, brackets and such I feel UPS or Fed-X is a Little more careful with the larger items and they can be tracked a lot easier than using the U.S., Postal service. Insurance will be on the Buyer's part if you want to add Insurance on, it will certainly add to your shipping charges but I can see how much it is later on today as well as let everyone know what the cost of the flat rate Boxes will be, I will Post the Prices of the flat rate boxes and shipping insurance charges later on. Let's Play Nice here if Other's buy parts ahead of you and I am Limited as to how many of them that I have to offer, that's the end of the story Please do Not make this Thread turn into a Flame War, I am Offering Good stuff at very fair prices and it is being offered on a First come first serve, Basis those that pick their part Number's out and make the payment through Pay-Pal will get Instant service & shipping as soon as the Transaction completes, I will Only be making One Trip per day to the Post Office or UPS or Fed-X and will do so in mid afternoon when these places are quiet and not over run with People.







I will Hold Part's for those offering to pay with a U.S. Postal Money order Only but I will Only allow a Five Day lapse on the Postal Money order hitting my mail Box I can not wait longer due to the volume of part's that we have to move here, I hope you all Understand that I am doing this as a Favor to those wanting the very best parts made for their Lawn Boy's but I will not be Taken advantage of by waiting any more than Five Business days to get the payment for them, I feel any Mail can be sent and reached here in Knoxville, Tennessee within Five Business days. We will Not be shipping any Part's out of the United States, for those of you Living in Canada or out of the U.S. I am deeply sorry but shipping out of the United States takes more time and due to the high volume of part's that we have I will Not have time for that. If you Live out of the U.S. and can use someone who Lives in the U.S. as your shipping Point I will certainly ship to them. I will answer those Placing order's for parts Only. I will Not have time to answer any other questions what we have is all listed I do not have anything else to offer so if you don't see your Part Number's listed we simply do not have it. All of the parts have ben looked at. I did throw out some fuel lines set's that the line had deteriorated I will Not Sell any bad parts all of our stuff is in NOS prime shape. Electrical Parts all seem to be fine but I can Not Guarantee that they work they have ben on shelves for many years but I assume they are fine as the business that had them had heat and air conditioning at all times and Nothing was subjected to Moisture or water damage. All Part's are sold as Is. I want all to pick their Own part number's out by Looking them up for your machines I will not have the time to do that it is all up to you, so once you Place an order and pay for it the part's are yours there will be NO Returns of any kind we will Not have time for that so be sure that the parts are what you want and fit your Mower by Looking up the part Number's Listed I know that they are all good number's as I looked up every one of them all day yesterday. There will Not be any returns or Trades for other part's once you have selected your parts and paid for them they are Your's to Keep.




Here is my name and address to send a U.S. Postal Money order to me for payment. We will Only Be Accepting Payment of U.S. Postal Money order's or an Instant Payment through Pay-Pal. Please do Not send us any other kind of Money order as they are hard to cash and it take's extra time running down places that sell them, I hope you all Understand I have to set some Basic ground rule's here to keep this from Going Nut's we have a Lot of great Part's to move here. These part's will be listed on two Other Internet Forum's that have a lawn-Boy section. it is the fair and right thing for me to do as I am a member of those forum's as well. How it is going to work is who ever respond's and pay's for the part's first get's them period it is fair and right to do it this way, and I hope everyone understands this. Here is my Name, address and Pay-Pal Link for Making payment. Please Post your Part's request's in the Thread response here to Not make this confusing. List your Part Number want's and as soon as the payment clear's your part's will be shipped. All Part's that are Pre-Packaged in Original OMC Lawn-Boy Package's will be shipped out that way. I do have many small part's in envelope's that will be shipped in flat rate boxes and packed well but not all of the part's are still In their Original factory boxes this was a Huge Lawn Boy dealership that sorted the parts for their shelves. Well without Further typing here you Go Guy's have at it and I hope you find a discontinued Part that you have wanted but have not been able to find. If Paying with Pay-Pal Please select the Gift Option as Payment. That way I will not have to charge anyone the 3% difference that Pay-Pal charges for other option's of payment, This Saves YOU The Buyer any additional cost on the Pay-Pal Transaction.:fing32: This List is huge here so to save time simply type in your part Number's in the search feature of this forum at the top of the page. If we have those part Number to see it will show them in my Parts Inventory list below. I hope taht this helps. Regards, Hammerdown


Make US Postal Money order's out to my name and address. For those wanting Instant service and shipping here is my Pay-Pal Link. Thanks..




Pay-Pal Link- SWTENRING32@AOL.COM


Kurt Vogler
1713 Wandering Road
Knoxville, Tennessee
37912
 
Last edited:

Hammerdown

Member
Joined
Oct 23, 2013
Threads
6
Messages
49
  • / We Bought out a 40 Year Old Auhtorized lawn-Boy Dealership this evening
1 NOS block assembly No Crank or cylinder liner, just the Outer cast aluminum engine block assembly D 640 Series -679748-$100.00
2-Blade Brake Cables-682929-$ 40.00 Each
2-Complete Transmission assemblies-104-7671-$ 130.00
2-Complete Transmission assemblies-104-7672-$130.00 Each.They cost $250.00 New
1-Gasket 93-4304-$50.00
7-Blade Nut's-$ 3.00 Each
3-F-Engine Carburetor Gaskets-$ 1.00 Each
1-F-Engine Governor thumb wheel-$1.50 Each
5-F-Engine throttle slide's-$7.00 Each
10-F-Engine cowl cover fuel shut's off lever assemblies, Valve and rubber grommet included in sealed Package's-$6.00 Each
1-F-engine metal float Bowl, main Jet and gaskets-$7.00

1-Piston Connecting Rod-684449-Standard bore rings and wrist pin Included $ 50.00

3-Gasket's-290814-$ 1.00 Each
3-F-engine Stens Needle and float assembly-$ 6.00
7-Walboro float, bowl gaskets-$5.00 each
4-White F-engine cowling Push bulb Primer's-$1.50 Each
5-Fuel screen's-611071-$3.00 Each
1-Wiring harness-682777-Fit's 8234-AE and some other Obsolete $30.00
1-Bearing -681830-Obsolete $40.00
1-Blade brake -93-4312-$ 35.00
4-Oil seals-945764-$3.00 Each
11-Crankshaft oil seal's F-series engine-$3.00 Each
3- Silver series Oil seals-94-5764-$3.00 Each
7-Engine shroud attachment screw's-93-4302-$1.50 Each
5-Drive Pulley F-engine set screw's-$ 4.00 Each
5-Plastic Grommets Brick top model's-941610-$ .25 Each
1-D-Engine head gasket-$6.00
1-Spring 93-4306-$ 4.00
1-Wiring harness-682996-$30.00
2-F-Engine handlebar Blade brake cable's-$25.00 Each
3-Switches-682996-$ 20.00 Each
1-Cable-68667-$ 30.00
10-5/16"-X-1/2" Shoulder screw-$1.00 Each
9-F-engine intake Carburetor Gasket's-$1.00 Each
7-F-engine silver series engine shroud screw's-$1.00 each
4-Carburetor gasket's-98-1392-$ 1.50 Each
2-Blade brake actuator lever's-611509-$ 10.00
6-F-engine Governor throttle spring's-$1.00 each
2-Spring brake's-611211-$ 20.00 Each
2-Retainer's-611213-$1.50 Each
4-Exhaust Gasket's-95-1778-1.50 Each
10-Intake and Exhaust gasket's Both-945795- Obsolete Parts $6.00 Each
2-Springs-611214-$ 1.50 Each
1-F-engine self propelled Transmission drive pulley-609976-$ 30.00
1-Pulley -95-1878-$ 14.00
10-Intake & Exhaust gasket's-945795- Obsolete part's $6.00
1-Bearing-681831-$7.50
6-Intake Gasket's 94-5795-$ .50 Each
1-Bearing-V-681830-$ 10.00
6-Intake Reed's-602588-$ 2.50 Each
2-Stop Pivot's-92-5412-$ 2.00 Each
16 -D--F-Engine Crankshaft Oil seal's-$ 3.00 Each
1-Early D-Engine electronic Ignition coil-Part is Obsolete 992917-$ 50.00
9-Flywheel Key ways-607199-$ 2.00 Each
3-610741-$ 6.00 Each 1- Complete package Side discharge chute-681880-$ 50.00
1-Rear axle-608304-Obsolete Part $ 30.00
1-Drive belt-93-7381-$ 4.00
1-Drive belt-611803-$ 5.50
1-Wiring harness-682777-$ 30.00
2-Bag chute Complete Kit Obsolete-683792- $65.00 Each
1-F-engine Long shaft self propelled complete short block assembly in it's Original Factory shipping box as New and Mint-$295.00
1-Rear Bag Large-$25.00
1-Rear Bag-J-3798-A-90278-$25.00
1-Complete F-engine carburetor-93-4331-$ 45.00
1- Muffler seal kit-683279- Disontinued item $ 70.00 2-Plastic self propelled Rear drive Tire's & wheel's-683850-$ 35.00

2-Commercial Push commercial mower steel rear wheel's W.-Grease fitting in them Orange in color -$50.00 Each

1-Blade-350852-$ 10.00
1-Blade-22B1801-$ 10.00
1-Blade's-JEN7261-$ 10.00
1-Blade 340786-$ 10.00
7-19" blades-$ 10.00 Each
3-21" blade's-$ 10.00 Each
2-20" blade's-$ 10.00 Each
2- Blades =340786-$10.00 Each
2-Weed Whacker Recoil springs-613102-$3.50 Each
1-Fuel petcock-120179 8.00

1-D-engine high speed carburetor Needle-$3.00
1-D-engine Intake Gasket-$1.00
3-F-engine Black primer's bulb's-$2.50 Each
7-Stens float bowl gasket's-486076-$ 1.00 Each
5-Primer bulb bases-607311-$ 1.50 Each
1-Carburetor float bowl-683783-$ 21.00
2-F-engine air breather cover's-$ 5.00
1-Older F-series air breather Outer cover-Green $ 6.00
4-F-engine throttle control rod's-$ 1.50 Each
1-Early F-engine Carburetor air breather base- Black in color $ 3.00
2-Later style F-engine carburetor intake air Breather base's-Black $ 3.00 Each

1-Spark Plug Push in style wire- with boot on Plug end solid wire core $ 4.00
1-Recoil spring-F-Engine Obsolete Part 682814-$ 4.00
1- recoil assembly-681396-$ 3.00
1-Engine Piston, ring, wrist pin-682086-Standard Bor $ 45.00
1-Carburetor Vent Valve screw 683644-$ 4.00
2-Rear axle bushing's-681904-$ 20.00
1-Sten's Primer Bulb F-series engine-$ 3.00
1-Governor-648-678521-1-$ 4.00
1-CX-Engine Governor-678736-$ 4.00
1-C-engine complete Master Carburetor rebuild Kit-$30.00
1-F-Engine commercial duty Primer-678414-$ 15.00
10-Governor return spring's-613142-$1.50 Each
2-Recoil spring's 613102-$10.00 Each
1-Ignition switch-679129-DS10-20.00
1-Ignition switch-682513-$ 20.00
2-Piston connecting rod bearings-632-677982-1-$10.00 Both
1-Fuel shut off--$9.00
1-Air breather-679425-$ 5.00
1-Primer-683817-$ 14.00
4-Wheel axle Bolt's-$2.00 Each
1-Relay-682776-$ 2.00
4-Rear deck gauge wheel lever's white-682231-Discontinued part $ 4.00 Each
5-Drive shaft assemblies-683129-Discontinued Part $ 30.00 Each
1-Fuel tank shut off lever with rubber Grommet-683035-$ 6.00
1- Control Cable Cam discontinued part -683430-$20.00
1-Bearing-681832-$ 8.00
1-MUFFLER COVER F -681614-$ 40.00
1-Used air Carburetor breather base dura-force-$ 3.00
5-Nut's-602201-$.50 Each
6- Intake Gasket's for Tecumseh -Gasket's-602052-$ 1.00 Each
2-Air filter's-602016-$ 2.00 Each
12-Snap Ring's-303712-$.25 Each
3-Nut's-130473-$ .50 Each
5-Roll Pin's-300096-$.50 Each
7-Flywheel Key's-120395-$ 1.00 each
2-Brick top starter Gear's-$3.00 Each
1- Rear Deck center mounted lever plastic cover White 607562-$ 4.00
1-Carburetor Float Bowl Valve stem-607570-$ 8.00
2- Carburetor parts 607571-$ 1.00 Each
1- Valve keeper's 607572-$1.50
1- Carburetor Valve springs discontinued item 607573-$ 6.00
1-Governor Bushing-604275 straight shaft trimmer-$1.00
7-Clip's-604259-$ .50 Each
7-Recoil guide spring's-$1.00 each
4-Governor springs-604269-$1.00 each
5-Lock washer's-603553-$ .50 Each
10- String Trimmer Gasket's discontinued -145564-$ 1.00 Each
2-Spark advance Governor Bushing's-604276-Discontinued part $ 7.00
7-Recoil Guide's-609229-$1.00 each
1- Washer 605256-$ .75
6-Clip's-605803-$.50 Each
5-White recoil handles Old style C-D and Early F-engine's-$2.50 Each
1-Stop Washer EF-609565-$1.50
3-Bolt's-648-602984-5-$1.00 each
8-Galvanized handle bar bent washer's-$1.50 Each
5-Gasket's-689419-$ 1.50 Each
9-Screw's-609452-$ .50 Each
1- lever Guard 609544-$ 1.50
6-Throttle plates brass-609632-$2.00 Each
2-Spring's-609638-$ 1.00 Each
3-Retainer's-611213-1.00 Each
5-Carburetor air breather assembly wing nut's-$ .50 Each
1- Blade Nut- 603164-$2.00
1-Rear wheel drive capitulator-603164-$15.00
1-Rear wheel drive capitulator-603475-$15.00
9-Rear wheel drive capitulator-61071-$15.00 Each
9-Rear wheel drive capitulator-610475-$15.00 Each
9-Rear wheel drive capitulator-$610476-$ 15.00 Each
7-Rear wheel drive Capitulator's-$15.00 Each
3-On/Off Primer bar switch's-606865-$ 4.00 Each
2-Recoil starter Pinion gear's-609133-$ 4.00 Each
2-Roller-606953-$40.00 Each
1-Oil seal-611397-$ 4.00
1-Fork shift 613245-$25.00
1-Recoil Handle-632-612430-1-$4.00
1-Worm wheel-61343V-$9.00
1-Manual-612745-$1.00
6-F-Engine-Flywheel key's-$.50 Each
5-Eye bolt's-611571-$1.00 each
4-Self Propelled-Drive Pulley set screw's-$1.50 Each
1-Gear-9496-$ 14.00
1-Pinion Brockway 612064-$ 8.00
2-Deck Height lever's-612657-$4.00 Each
2-Acorn Nut's-612168-.50 Each
1-Gear-9496-$ 14.00
3-Springs-604248-$ 2.00 Each
8-Bent Zinc Plated handlebar washer's-$1.00 each
2-Gasket's-604116-$1.00 Each
1-Gasket-6096051-$ 1.50 Each
2-Recoil starter Gear's-604644-$6.00
10-Screw's-605119-$.50 Each
9-Throttle Rod's-604297-$ 4.00 Each
4- Gasket set Discontinued 604624-$ 4.00 Each
8-Wheel bolt's-603441-$2.50 Each
4-Gasket's-604283-$ 1.50 Each
10-Carburetor wing Nut's-$ .75 Each
1-Seal 608224-$ 4.00
5-Stern's carburetor float assembly-678113- $7.00
5-Gasket's-607824-$ 1.50 Each
12-Push Nut's-605546-$.50 Each
2-Gasket's-605425-$ 2.00 Each
2-Carburetor jet's-605140-$
2-Roll Pin's-605013-$ .50 Each
5-Speed Nut's-608027-$ .50 Each
21-Snap ring's-607675-$ .50 Each
Rear wheel drive roller Guard-607768-Green color $4.00
5-Gasket's-608836-$ 1.00 Each
2-Shoulder bolt's-3549-697809-5-$1.00 Each
1-Float-681144-$4.00
1-fuel filter-607637-$2.00
1-Rear deck height adjuster-607879-$6.00
1-Complete Bag assembly-683792-$35.00
1-Silver series V-engine Complete recoil assembly, Incudes metal outer recoil shroud, starter rope no handle-$20.00
1-Weed eater single line spool-68274-$ 5.00
4-Plastic float's-75-540-1-$3.00 Each
1-Stern's float Bowl-525-200-$3.00
3-Float Bowl''s-20-141-1-$4.00 Each
1-Stern's seal-495-055-$ 3.00
1-Stern's High Speed Carburetor needle-$ 4.00
1-Stern's High Speed needle-620-072-$ 4.00
7-Clutch washer's-65-4760-$ 1.50 Each
1-Gear-65-1750-Discontinued part $ 10.00
10- pinion Gear's-104-7669-$ 8.00 Each
2-Friction ring's-654710-$ 1.20 Each
1-Compression spring-65-4720-$3.00 each
6-Cir clip's-65-2720-$ .50 Each
6-Washer's-36-4780-$ 1.50 Each
6-Key right-66-6040-$ 4.00 Each
4-Gear's-66-6040-$ 4.00 Each
10-Ring Clip's-65-2720-$.50 Each
1-Ball bearing-38-7820-$8.00
10-Gasket's-61-2574-$1.00 each
4-Key rocking-66-6040-$ 4.00 Each
4-Key rocking-66-6050-$ 4.00 Each
1-Gear-104-7668-$ 14.00
1-Clutch drum weed eater-Discontinued part 15-3592-$6.00
2-Eyelet's 145566-$ 4.00 Each
10-Fiber washer's-10-440-$ .50 Each
1-Spring brake assembly-92-4934-Discontiued part $ 35.00
1-V-Belt-92-1043-$ 10.00
1- String Trimmer OUTER SPOOL EYELET ASM 682068-$ 10.00
1-Gear 1st. SPUR, 37T BEVEL-104-7668-$ 10.00
2-Piston's, Ring's and wrist Pin's-100-2916-Standardf bore $ 40.00 Each
6-Key washer's-65-4740-$ 1.00 Each
6-WASHER-CLUTCH-65-4760-$ 1.50 Each
1-Air filter- Bracket support 100-677-$ 3.00
5-Old style white recoil Handles-$3.00 Each
1-BBC CONTROL SER AY-682997-$ 125.00
2-Chute adapter-612671-$15.00 Each
2-D-engine Exhaust Muffler Plates Kidney shaped-$9.00 each
2-V belt's-92-1043-$ 10.00 Each
4-Handle Bar thumb Knobs Black Plastic-$4.00 Each
 

Hammerdown

Member
Joined
Oct 23, 2013
Threads
6
Messages
49
  • / We Bought out a 40 Year Old Auhtorized lawn-Boy Dealership this evening
Hello Lawn-Boy Lover's
I am going to consider selling all of this Huge NOS Brand New OMC Lawn-Boy part's inventory as a Package deal Currently they are Taking up a Lot of room in my small garage, I have Six or seven Huge Boxes of them as well as many Handelbar mounted bag brackets and complete Boxed bag assemblies. For those wanting to Cherry Pick the Best of the Best parts then sell off the remainder of them, it would be an Excellent way to Gain some Very serious cash flow return. I simply, do not have the time for it, but all of these part's could Certainly be offered and sold Easily on Evil-Bay Easily returning Twice to Three time's your Initial Investment of them. Many of the part's as listed in my inventory Thread are now discontinued Part's so in Essence that raises the Bar on the Unavailable part's that can Not be bought any where at any price. I have added all of the part's up and The total Inventory comes up to over $11,000.00 in current retail price's, all Have Good Trackable Actual Lawn-Boy Part Number's showing these current retail prices, But Sadly, those are for replacement part's of Much less quality as Lawn-Boy has Not made any parts at their OMC Manufacturing Plant now for many, many Year's. Most of the part's are still in their original OMC Lawn-Boy Boxes or envelopes. If you are so Inclined to get in on a Killer deal like this, Please feel Free to shoot me and E-mail so we can discuss this further.I can Load all of the part's Boxes on a pallet, strap them and ship anywhere in the Lower 48 states, I want to keep the shipping within the United States and UPS or Fed-X does deliver to all Point's in the United States and offer's Insurance on shipment's as well. The shipping of this part's package deal would have to be checked on and quoted of which I would be happy to do for someone after we discuss this further. Regards, Kurt
SWTENRING32@AOL.COM
 

Hammerdown

Member
Joined
Oct 23, 2013
Threads
6
Messages
49
  • / We Bought out a 40 Year Old Auhtorized lawn-Boy Dealership this evening
Hello MikeO
I have always Been a man of my Word... Check your E-mail The Lawn Boy Short block assembly is Your's..:fing32: This Thread is CLOSED All of the rest of the part's have been sold YEEEE....HAWWWWW Moderator's Feel Free to shut this thread down Thank's for the Two Guy's who Bought parts, For the Rest Ya'll Missed some really good stuff and all brand New, Check out what Mike O ordered and will be getting shipped soon... See Ya... It's All Gone Now Ya Snooze Ya Loose..... Hammerdown


DSCF09471.JPG

DSCF0951.JPG

DSCF0950.JPG

DSCF09492.JPG

DSCF09481.JPG
 

Fish

Lawn Pro
Joined
Aug 2, 2013
Threads
11
Messages
5,130
  • / We Bought out a 40 Year Old Auhtorized lawn-Boy Dealership this evening
So I can sell stuff here too shamelessly? Hell, I have been here a while just helping folks fix their mowers for free!!!!

Dang, I need to become more of a mercenary....!!!!!!!!
 

Signman

Forum Newbie
Joined
Sep 15, 2014
Threads
0
Messages
2
  • / We Bought out a 40 Year Old Auhtorized lawn-Boy Dealership this evening
You wouldn't happen to have a deck for a S21ZSM push Lawn Boy mower in that pile?
John Murrell
 

Fish

Lawn Pro
Joined
Aug 2, 2013
Threads
11
Messages
5,130
  • / We Bought out a 40 Year Old Auhtorized lawn-Boy Dealership this evening
So what is the status of this thread???

Hell, I have a bunch of parts to sell!!!!
 
Top