CMM1200 stalls under light load

Billdherup

Forum Newbie
Joined
Jan 23, 2014
Threads
1
Messages
2
I just bought a used CMM1200. The seller warned me that it works perfectly but stalls without being overheated.
This was an honest assessment.

It stalls after maybe 5 minutes of use, then stalls more frequently after that.
After waiting about 30 seconds each time, it starts right up again, but then stalls.

I am thinking there must be a sensor somewhere that is bad.

Any suggestions?
 

CWODonato

Forum Newbie
Joined
Feb 9, 2014
Threads
0
Messages
1
I just bought a used CMM1200. The seller warned me that it works perfectly but stalls without being overheated.
This was an honest assessment.

It stalls after maybe 5 minutes of use, then stalls more frequently after that.
After waiting about 30 seconds each time, it starts right up again, but then stalls.

I am thinking there must be a sensor somewhere that is bad.

Any suggestions?

I have this same issue, have you figured it out yet? I'm thinking it might be the circuit breaker.
 

Billdherup

Forum Newbie
Joined
Jan 23, 2014
Threads
1
Messages
2
I did find out that it was the circuit breaker.
They cost about $18
I removed the old one and bypassed it.
The thing worked perfectly without it.
Bill
 
Top