lawn tiger
Forum Newbie
- Joined
- Sep 18, 2013
- Threads
- 1
- Messages
- 3
Hi, I have a Scag Turf tiger 52" cut with approximately 400 hrs. About mid season I started having trouble with the fuses getting hot and melting also it started leaving the grass partially cut especially on the right side. I have changed the deck belt, the drive belts and the clutch and it still wants to kind of lay the grass down and not cut it. I have checked the deck to be sure it is level and checked the tire pressure. It seems as if the blades are not turning fast enough. I usually use the gator blades, but I went back to the regular blades, but no chance. I also checked the mandrels and they all seem tight. I have had it approximately 8 years and have had very little trouble with it replacing only one hyd. pump and the bearings in one mandrel. If anyone has any ideas they would be deeply appreciated.
Thanks,
Lawn Tiger
Thanks,
Lawn Tiger