Ric
Lawn Pro
- Joined
- May 7, 2010
- Threads
- 142
- Messages
- 5,765
The belt number matched the belt I took off the mower, I'll have to take a closer look at that spring and determine if its wore or if I botched something when reinstalling. There is some tension on the belt, but if I squeeze hard enough I can get the insides to touch. Thanks for the help.
I do know that when you start replacing belts you have to adjust the cables, so just a word of warning don't adjust that cable to tight or you will probably pop the end off. start the procedure with the cable lose and adjust a little bit at a time until you get the thing where you want.