"LITTLE WONDER" it ever runs Leaf Blower w B&S 11HP I/C engine HELP !!!!!!
:confused2:B&S Engine ID as follows:
MODEL TYPE CODE
254422 052601 9008 0711
After having taken a good look at the engine & carbafter responses from my original post, I think quite possibly that my real problem may be that I am missing some linkage rods & possibly a spring, all connecting from the Carb/choke/governor set up.
My machine has just 1 linkage rod from the bracket upto the carb throttle plate, & one spring from the governor arm down to the same pivoting part at the bottom of the bracket. I think there should be 1 or 2 more rods involved, & possibly 1 more spring.
I think this is the problem, because I went to the B&S site & found the parts sheet. My problem continues to be, that every place I look for info, I cannot find diagrams or parts SPECIFIC to my engine, but rather 2 or 3 variations on the parts with foot notes, & not a single clear pic or photo. I have also noticed that they have possibly 2 or 3 throttle mounting brackets for this engine according to the drawings I have seen both in B&S books & on their web site.
Mine does not look like either of the 2 I have found under parts pics, but IS very similar to them. This may just be a fluke because all of the pictures are hand drawn sketches not actual photos of the parts.
I am in desperate need of a Picture,Diagram or even a Hand Drawn sketch of the carb to bracket to governor assembly from the back side that will show all springs & rods in place.
:confused2:B&S Engine ID as follows:
MODEL TYPE CODE
254422 052601 9008 0711
After having taken a good look at the engine & carbafter responses from my original post, I think quite possibly that my real problem may be that I am missing some linkage rods & possibly a spring, all connecting from the Carb/choke/governor set up.
My machine has just 1 linkage rod from the bracket upto the carb throttle plate, & one spring from the governor arm down to the same pivoting part at the bottom of the bracket. I think there should be 1 or 2 more rods involved, & possibly 1 more spring.
I think this is the problem, because I went to the B&S site & found the parts sheet. My problem continues to be, that every place I look for info, I cannot find diagrams or parts SPECIFIC to my engine, but rather 2 or 3 variations on the parts with foot notes, & not a single clear pic or photo. I have also noticed that they have possibly 2 or 3 throttle mounting brackets for this engine according to the drawings I have seen both in B&S books & on their web site.
Mine does not look like either of the 2 I have found under parts pics, but IS very similar to them. This may just be a fluke because all of the pictures are hand drawn sketches not actual photos of the parts.
I am in desperate need of a Picture,Diagram or even a Hand Drawn sketch of the carb to bracket to governor assembly from the back side that will show all springs & rods in place.