The mower was given to me and didn't run. It needed a new fuel tank, idler pulley on deck, new engine oil drain plug valve and a new carburetor. There was fuel getting into the crankcase. This sounds like a common problem? Has anyone else experienced this? Anyways I mowed twice this year (1 acre each time) and started a third time and busted the connecting rod. The engine number is 301707-0137-e1. I haven't been able to find a good deal on a short block which are fairly expensive. My questions are as follows:
1. Is this engine worth rebuilding (getting a short block) or is it a poor design that will continue to have fuel get in the crankcase?
2. Is the piston size (weight) too large for the design of the connecting rod?
3. If I were to get a new engine do all of the briggs and Stratton engines have the same hole dimensions for the four holes which bolt to the mower?
4. If my engine is a faulty design can anyone recommend a more reliable engine? Smaller HP. Larger?
This engine has a 1" x 3-5/32" crankshaft, Tapped 7/16-20 with Keyway.
I basically want to minimize the amount of money I put into this mower right now since I don't have a lot of spare cash. But I want a reliable machine that will give me the best performance for the least amount of money invested. This seems to be a cheaper mower and I will probably get a new mower in 5-10 years once this machine is no longer worth fixing.
Thanks for reading and any help is appreciated.
1. Is this engine worth rebuilding (getting a short block) or is it a poor design that will continue to have fuel get in the crankcase?
2. Is the piston size (weight) too large for the design of the connecting rod?
3. If I were to get a new engine do all of the briggs and Stratton engines have the same hole dimensions for the four holes which bolt to the mower?
4. If my engine is a faulty design can anyone recommend a more reliable engine? Smaller HP. Larger?
This engine has a 1" x 3-5/32" crankshaft, Tapped 7/16-20 with Keyway.
I basically want to minimize the amount of money I put into this mower right now since I don't have a lot of spare cash. But I want a reliable machine that will give me the best performance for the least amount of money invested. This seems to be a cheaper mower and I will probably get a new mower in 5-10 years once this machine is no longer worth fixing.
Thanks for reading and any help is appreciated.