Truckdriver09
Member
- Joined
- Jun 3, 2012
- Threads
- 5
- Messages
- 27
My battery was not charging as the mower ran so I checked out the stator and I am not getting any voltage (AC) from the stator leads. So I replaced the stator thinking it was bad, but now I am only getting 13.2 volts from the new stator...and after a few minutes, the voltage from the stator dropped to 8. The manual tells me to disconnect the stator leads from the regulator, but if I do not have them attached to the regulator while I am measuring voltage, I get no reading. Any ideas why this is?
The mower is a craftsman command cv491 18hp
The mower is a craftsman command cv491 18hp