Search results

BTW - I found an alternative. I was cleaning another engine and the carb looked familiar to me. It is a B&S 799868. Almost exactly as the 694146. Only difference is the linkage attaches to a plastic part instead of a metal one.

Will try - thank you !!

Do you know if there is an alternative and to find?

Thanks. Sorry I typed it in wrong in the question. 694146 is the part I cannot find anywhere.

Hoping someone can point me in the right direction. I have a B&S model 12J802-2369-B1 engine. Need a carb and the B&S site part look up has the part number as 194146. I can't find this anywhere to purchase. Is there an alternative I can use because it's not available on eBay or Amazon. Or...

yes - it wasn’t moving

I’m new to using this - so did my first test. Found an old B&S lawn mower, hooked up leak detector, set to TDC, put in 70lbs of air. Here is what I got. 25lbs out Feel air coming out of muffler - not a lot Feel air coming out of carb - a little more. Any diagnosis?

My Photos

I think it was overfilled - a lot of oil came out. There was water in the gas tank - totally cleaning the carb and replacing the gasket. Oil also came through the breather onto the air filter. I guess I can’t drain this one through the dipstick like I’ve done with other mowers. First time...

Both valves were closed which is why I’m so puzzled. How does oil pour - not drip through the muffler when tipped on its side?

I found a Briggs and Stratton 10T802-3776B1 on the side of the road. When I went to drain the oil, I tipped carb/air filter up to drain through the dipstick and oil was pouring out of the exhaust. I thought I had the cylinder at TDC. Any ideas of why this could occur - something internal? If...

Re read this. You are right - it’s the breather. I’m a little new to all this. Thx

Thanks. So not normal. Yes, I think the next step is to take the head off and check the seats and clearance. Yes - not the breather, cover over the springs. Appreciate the quick response.

Too off the valve cover to replace the gasket on an L Head Briggs and Stratton 126T02-0301-B1. Only symptom I had was oil leaking from the cover (bad gasket) - engine ran fine. I noticed a lot of carbon build up in the valve case on the exhaust side. Was just going to clean up and move on...

Engine bogs when I throttle. Replaced fuel lines, filter. Exhaust screen is very clean. Using ethanol free gas. Only thing I see short of replacing the carb is the gas tank doesn’t hold pressure well and looks like air is leaking between the gas tank and fuel lines. Looks like someone used...

Have an Echo 210 blower that runs fine at idle (and for a long time), but as soon as throttle is applied, bogs and quits. I’m just getting into small engine repair, have done a lot of reading - no experience, but this one has me stumped so far. Not good for my first project. Here is what I’ve...