Search results

Results 1 to 11 of 11
  1. C

    Looking for a problem free 42" Zero Turn Mower

    Gravely ZTX42
  2. C

    HELP with rear wheel removal

    Hi, I need to get the rear wheels off my ZTX 42. I did not realize it had the cheepo, one piece wheel/hub, or I wouldn't have bought it. I removed the bolt, applied lot's of blaster, tapped, pulled, cussed, even rode around the yard, and the damed thing will not come off. No holes to insert eye...
  3. C

    High-low Adjustment screws aren't screws...

    https://www.amazon.com/Lucky-Seven-Carburetor-Adjustment-Carburator/dp/B07XG2L2NT/ref=dp_prsubs_2?pd_rd_w=FDnGl&content-id=amzn1.sym.d20ffcc8-a6b0-4cbb-83cc-8be2fe61f82c&pf_rd_p=d20ffcc8-a6b0-4cbb-83cc-8be2fe61f82c&pf_rd_r=D2YD2P5H40JFK9FHB8FR&pd_rd_wg=JUtgy&pd_rd_r=30e04fe8-ffcd-4358-9874-1a0cc6...
  4. C

    do I rebuild or replace my b&s 24hp intek motor?

    Engine is now a boat anchor. I wouldn't spend one cent on it. Sad but true.
  5. C

    Cracked spindle housing, advice?

    I rebuilt my Cub Cadet deck using these deck reinforcement plates. I used 2 sets, one on top of the deck, and one on the bottom of the deck. Drilled out the threaded holes in the spindles, and used some grade 8 bolts and nuts. This helps the spindles from breaking an arm off, as they are very...
  6. C

    JD E180 - Stripped Zerk fitting on Spindle.

    Well, if it does have sealed bearings, pumping the spindle full of grease won't do anything for the bearings. Maybe just smear a dab of JB weld in the zerk fitting hole, and forget about it. Leaving the hole open would let water in, and that wouldn't be desirable.
  7. C

    Softest riding 32 or 34 inch riding or zero turn mower

    It looks like most of these only have an inch or so of travel. Do they really make any difference? My Gravely ZT42 kills my back, when going any kind of bumps. BTW, I weigh an average 200 lbs. Any suggestions, besides loosing weight?;)
  8. C

    Gravely runs for an hour and dies.

    A happy and useful ending.:)
  9. C

    Gravely 42" ZT XL 38hrs, buying used

    I think you got a deal!;)
  10. C

    Gravely ZT-34 with Kohler KT620 Oil drain extension tube question

    Yup, what he said, above. It was a major pain in the rectum. Poor design, drain hole in block recessed, not much room. Nipples, couplings, elbows, cutting torch ????
  11. C

    Gravely ZT-34 with Kohler KT620 Oil drain extension tube question

    It ain't no fun easy project. Will require more than just the extension hose kit. Nipples, couplings, elbow? There isn't much room to mess with.

Footer Links 1

Top