Search results

That is right $12 but it wasn't running right. I ditched the plastic primer style carb and replaced it with a metal walbro lmr carb with a adjustable high speed mixture screw. Engine is a Lawn boy v series that runs strong. I did have to adjust the cable and grease the self propel to get it...

Found it on the curb the old carb was garbage and had no spark i cleaned the points and put a used carb on it and it runs well. Best i can figure it is a Tecumseh LAV30 the engine model is 143-213012 serial 1089B. The deck model is 131.91024. Looks to still have the original wheels.

I buy ethanol free my problems are solved and i run it in everything year round.

Hope they don't follow the path that Tecumseh products went down. https://www.cfo.com/bankruptcy/2020/07/briggs-stratton-files-chapter-11-to-effect-sale/

I am drawing right now and my employer apologized and i knew it wasn't his fault since he is a independent small business i get it. He said my job is still going to be here when they are allowed to be reopened and there was talk about reopening to certain customers but that went down the toilet...

I feel like i will have to work till the day of my funeral life shouldn't be this hard.

I use NGK or autolite and both are good in my book i never did like a champion.

Yes i mow grass on the side to make a living in the warm months but due to the virus along with being laid off from my other job this has moved to my full time job for the most part. Some of my commercial customers have closed there business till further notice and until they are safe to be...

Having difficulty locating the lower pto shaft seal it is part number 26208 through tecumseh.

My local ace had the wrong price posted on this oil i told a few employees about this and they shrugged it off saying they can do nothing about it. So i cleaned them out good and proper of their stock, I should be good for a year or so now. 3.50 for the 6 pack of 1 gallon mix 6.00 for the 6...

My dealer is has been pushing these hard and has been selling a lot of them over the years and the other lawn guys are saying in my area it is a strong dependable trimmer and im thinking of purchasing one for myself to use. I currently use a older redmax tr2350s and it is light and has decent...

sorry i forgot about this thread here is a video instead. https://www.youtube.com/watch?v=YhW7hJC-sic&feature=youtu.be

picked up this mower off craigslist for 30.00 not running but does run on a prime the carb is gummed up it's going to need a complete fuel system serviced anyway and some pieces replaced can't seem to find much info on it. it is a cast aluminum deck with side discharge only and is extremely...

i think i stole it at $45.00 it has a 2 hp c-12 engine uses 16:1 mix it runs fine but i plan to check it out any way and replace the seals and clean out the muffler/exhaust. i think the deck has been repainted at some time it came with a can of lawn boy oil and a spare blade. here it is.

finally got the deck level and replaced the worn stripper on the back of the deck with a piece of thick rubber mud flap

got a lot of power for 3 1/2 hp has a D600 engine https://www.youtube.com/watch?v=9QWKDUPwvws

i acquired a 1974 7263 with a d600 engine i used it for a few days then the coil went bad. come to find out lawn boy has quit producing the part. i had to source a NOS coil on fleabay. i hope lawn boy doesn't follow suit on ignition modules for other models. im working on replacing the crankcase...

picked this up off craigslist for 200$ back in January finally got around to repairing it needed two new hydraulic lines along with new 15w50 oil and filter, it has parker wheel motors and hydro gear pumps. I'm guessing it's worth a lot more than i paid if i clean it up and do some maintenance...

Im looking into a lighter and more powerful trimmer since my echo is killing my back since i do a lot of trimming per week between the yards i maintain and my own how are these trimmer my dealer has about four left but said they have been discontinued he said they were the number one seller but...

its a yellow lawnboy with a briggs engine the decks are cast not steel with ball bearing wheels you can mulch/bag/discharge © 2014 SABER EDGE / www.SABERTURF.COM

im looking to buy this when i get paid ( im low on cash right now ) at 35$ and running i think it is worth it but a question is the deck a 19 or 21 inch cut??? Lawnboy Push Mower

24 HP professional-grade Kohler 7000 Series V-Twin OHV engine 54" heavy-duty fabricated mowing deck Adjustable, over-sized lap bars with full-length comfort grips 7 mph forward 4 mph reverse. *** Also available with a Kawasaki engine...

:laughing: well i'm waiting for a reply from email this one suffers from a bent shaft but is in good shape with a 3 spd transmission. reason im getting because i got a spare engine in my garage and im bored Honda Push Mower - For Sale For Parts along with that i will be inundated with spare...

what are the differences between the two besides price is the 230 sturdier than the 225? i need some solid comparisons.

:laughing: Well my old mtd pusher bit the bullet tecumseh 5hp 12 yrs old lost compression needs rebuilt blah blah blah. Deck is in amazing condition no rust or paint peel. I stumble upon a small engine shop with a new old stock tecumseh xl 4hp cast iron bore has no safety brake or primer carb...

anyone care to buy me one :biggrin: you can't bog these down The chainsaw guy log testing Homelite 3100G chainsaw 4 22.AVI - YouTube

Went to a local dealer browsing and i found one in my price range because money is tight and i want a decent mower tired of hand me down crap. Just wanting a basic side discharge/mulching mower i found this beauty. Two models are available one is just a regular push mower and the other is...

I found these two mower for sale one is a honda and the other is what looks like a big 6 tecumseh? i might be wrong here is the first one. 21 inch tecumseh 4hp electric start self propelled hivac with bagger seems very nice to be so old Small Engine Warehouse: SNAPPER-214015 - Snapper...

who sold greenbrier brand mowers it is a MTD 85 model 22 inch cut 3.0hp briggs

I'm needing a better mower and found this I'm getting it on Monday i offered 125$ Lawn Boy :biggrin: now i just need a mulching plate.

I was brownsing the walmart website and noticed that they are carrying murrays again but no this isn't no ordinary murray. It is a MTD/Weedeater/Poulan/Husqvarna built unit just have a look for your self on these images i posted. What got me thinking is why now? and not then? and i suppose...

were can i buy the tool to adjust that adjusts the carb on my poulan wild thing it is very lean and bogs down. i tried contacting poulan and poulan pro but they said they are not allowed to sell me the part :mad: which is part no # 530035560. can anyone help me. - Jake

I live in park city kentucky a rural spot in the middle of sink hole country.I live in a house that is rented to me. I own a 1994 mtd statesman with a 12.5 briggs and 42 inch deck 7 speed shift on the go. I own a three old push mowers one is a 92 model murray 20 inch cut and the others are a...