Search results

This chainsaw will start good, idles good, revs up to full throttle good. The problem comes after 30 seconds of wide open throttle it will bog down and die. I have adjusted the high adjustment on the carb to no avail. I have checked the fuel lines, they are good. Has fresh gas. Good spark plug...

I need to replace the vibration dampeners on my 034 AV. This looks like a big job Does anyone have some suggestion on how to do this or possibly know where I could get instructions on how to do it? I am lost on how much of the saw I need to disassemble to get to the bushings. Thanks for any help.

I am working on a Kawasaki GA1400A Generator Code # GAT 40A-BS00. When I removed the carburetor to clean it I removed the main jet from the carb and tried to use a twist tie wire to clean the small openings in the jet. The holes are plugged tight, I have soaked for a couple of days in carb dip...

On this saw it is hard to start. it will try to start on the first pull. Then you have to take the choke off, lock the throttle in wide open position, and pull the rope several times to start it. once started it runs great, goes from idle to wide open instantly with no hesitation. It idles...

On my SM225 when trimming the trimmer throws the grass and small rocks or other objects at me. Does Echo have a different debris guard I can put on this or is there some way to keep from getting pelted every time I trim the lawn? Thanks for any help.

on a MTD riding mower on the hydro-static lever there is a switch that is a safety reverse switch. Part #725-1713. Does anyone know if this is a normally open or normally closed switch? Thanks for your help.

Working on a OH195ZA-71275J. The engine is on a garden tiller that is belt driven from the engine. When I pull the starter rope the engine kicks back and pulls the rope out of my hand. I figured the flywheel key was sheared. Tore it down to the flywheel and the key is fine no marks on it. What...

I am looking at two engines. One states it is 6.5 HP the other states 9.5GT. how are they going to compare power wise?

Working on a Briggs 190412-3098-01 880122110. I have the engine running and runs quite well. The issue I am having is that it will only go to 2000 RPM. I have adjusted the speed control with no effect. I ran the throttle manually and with the throttle plate as far open as it will go, I can...

I have a Briggs 190412-3098-01 880122110. The engine was running but not good. The carburetor needs some work on it. I pushed the metal tab onto the spark plug to shut it down and the engine kept running. I pulled the spark plug wire off and it kept running. I had the plug wire about 3 inches...