Search results

I bought this Murray mower for a friend who is kind of down on their luck thinking I could put a blade on it and have them a good mower but it's surging really bad. I can watch the governor moving back and forth so I pulled the carburetor apart 3 times cleaning it very well I did not use carb...

I have a Bolens bl100 line trimmer with a walbro 682 T carburetor it wouldn't start so I took the carburetor apart the diaphragm looked good carb had a little debris on the screen I cleaned it out real good sprayed some air to dry it off make sure all the ports we're open and put it back...

I got this Weed Eater One model 261 riding mower for a very small narrow yard and the guy I bought it from says the chain stretched and keeps falling off. Well the sprocket is flimsy plastic and I think that is the actual problem and not the chain. Anyone replace one of these? I looked on Sears...

Thanks but I just got back to the house and it is mowing good. Here is a pick of where I connected it. There is no idler arm on this mower, the spring hold the bracket that holds the deck on and that bracket kind if swing forward and backward as you lower the deck so that spring keeps it tight...

The deck spring came off after I hit something and I see the bracket in the rear but not positive where it connects to pull deck back for belt tension. There us a bracket the deck connect or hangs from that is s big square with a big round cut out and that has a shaft towards the rearrear that...

I have owned this trimmer for a while and it is getting hard to start. Replaced the plug and cleaned carb although it was real clean inside. I have to spray starting fluid to get it started and then it runs great. Wonder if a different kind of plug would help it to start easier? I like the...

After replacing all of the gaskets it still wouldn't start so I pulled the carburetor and took it a part the bowl looked dirty so I pulled the main jet and it was stuck after a while of working with that I got it out and it was completely corroded and this was supposed to be a brand new...

Craftsman mod. 917.378501 ser. 081103M 017329 I put In a new spark plug, new fuel and lines and cleaned the old carb BEFORE I bought the new carb and installed it but I used the old gaskets. Can that cause it not to deliver gas to the engine? Maybe it is sucking air like suggested. I will buy...

I have a craftsman push mower with a 5.5 Honda engine and it wouldn't start so I put on a brand new carb and dumped the gas and put on new fuel lines. Still won't start but it will run a few seconds if I spray start fluid in carb. Its like the gas isn't getting into the engine? Any ideas? I put...

MTD tines must be made with gold! Holy smokes its like $300 for replacement tines! I got the tiller running and it is gonna need new tines part # 742-0305 and I want to know if the cheap ones on eBay can be drilled to fit or if there is a source for cheaper tribes? I know someone on here has had...

I hauled this out of my Dads yard. It is MTD model 213-430-062 and it says Lowes on it and is blue. It is a rear time tiller with a 5hp Briggs Stratton motor. I had to pull the tank to get the crud out of it and now I'm trying to figure out exactly how the governor and throttle were connected...