Search results

I have a 10HP HM100 15xxxxxxxxxx snow blower, that has been giving me trouble for a while now. (if you want all the extra numbers I will need to remove the electric start button) What I did to prepare for the winter. Before I put gas in it I took the main jet out, cleaned all the holes with a...

Hi guys Were in the biggest snow fall so far this year and when I went to go use my snow blower it wont start. I can see lots of gas dripping from the bottom of the carburetor. Before i saw this i warmed the engine up and i can see hot air coming from the carb right beside the intake manifold...

Hello I have an XR-88 weed eater and its not running. I changed the fuel line. it only had 1. and there is no primer. How does ait get back into the tank because its only sucking gas out causing negative pressure. Can someone enlighten me on how this fuel system works. thank you.

The title is my problem. Some more detail in the matter. It will walk but you need to pull the lever past its stopping point and then give the mower a push and it will start to walk. I looked underneath it and has an assistant pull the lever everything looks fine. I think i might need to shorten...

Well I got another engine because I broke the last one. This one is old and has been sitting for a long time. It wasn't attached to a deck. So I put it on my old deck cleaned the carb and the gas tank. When i pull the starter cord Its extremely hard. I take the spark plug out, and now its easy...

I got a lawn mower for free and it wouldn't start. It was covered in oil and grease. The air filter has so much oil in it that the oil was dripping from the bottom of the air filter. I cleaned everything my spark plug was drenched in oil. I guessed that the problem was the piston rings went...