Search results

I never touched the wiring harness of any safety switches. The machine is as he bought it used & ran for 2 years. 2700 hrs. UPDATE - older Machine to dealer 1st.- dealer said left hydro is shot - taking all the engine power. Yet, it will work fine for an hour before it starts acting up, losing...

Don’t worry about this post any more , I definitely don’t want your help !

All belt tensioners are free & greased. Belts are in good condition. The engine is definitely the problem. Now, his other matching machine has the same problem. Both are Laser Z’s 2009 - but this one only has 700 hrs. on it. Engine just started doing this like the other machine- which is at the...

Exmark Laser Z - starts fine and throttle's up fine, but doesn't have any power when trying to go up a slight incline without mower engaged. I have checked both plugs. ( firing clean, cocoa brown, checked both coils and reset gap. cleaned rust off of flywheel ) It's as if I'm not getting spark...

Check the fuel bowl - fuel shutoff solenoid on the bottom of the carburetor. They get weak and are spring loaded to shut off the fuel even if they have the 12 volts ( with key on ) Some are made in pieces so you might be able to unscrew it, take the pin part out the screw it back in and try...

If it cranks but won't start, It could be a faulty fuel shutoff solenoid on the bottom of the float bowl on the carburetor. The windings go bad in the solenoid and it shuts the fuel off, even if the 12 volt feed to it has 12 volts while key is on ! Some of them are assembled in separate pieces...