Search results

Belts ok. Took to mower shop. Mechanic took lower back cover off to check pulleys,tension on belts ect. Checked out ok. Back together, worked in forward and reverse. Mechanic had no explanation. This happened to the owner last summer with the same results.The owners yard takes 30 min. to mow...

That makes good sense as it happened after releasing the brake. I will be checking those belts next week. Thanks so much, gatorblade

Borrowed neighbors cub 30. Mowed OK. Shut off, blew off, started back up to put in shed. Won't move in forward or reverse. It's acts like when you pull out the wire at the rear end on a hydrostatic mower to disengage so you can push the mower around. It's like there is a safety switch not...

I need to replace my drive idler pulley on my 2002 Hustler Z 23hp. 60" mod.926253. Does the pulley come off the bracket, or the bracket and all come off? When does the tension spring come off? Thanks rockman

Where the gear on the steering shaft meets the steering plate is very sloppy. The two pivot steering rods from the plate to each wheel seem flimsy. My 93yr.old Father -in -law has a tough time steering on this 9yr. old mower. I realize this is a residential mower and you get what you pay for. $...

My father-in-law is 87. Trying to find him a small gas push mulching mower for trimming only. Self-propelled is out ,to much pulling backwards and heavy. Mtd has a 20" but is side discharge only. He mows often so I thought if he's only taking off an inch maybe blocking off the discharge might...

Looking at the LTX 1045 Cub Cadet for my sister to mow her and Mom's yd. The 2 yds. next to each other total 3/4 acre with many mature maple trees and stuff. I trailer my Hustler 60" Ztr but that gets old and sis don't do Ztr's. Mom's Craftsman and Jacobson are done for. Sitting on anything is a...

I mow an elderly person's yard with his late 80's yardman 21" mower mod.#124 848L 401. One lever adjusts all 4 wheels. Why would yardman do away with such a great feature! Bagger works great. Deck is in great shape. The self-propell feature needed work so I took it all off. I walked a little...

A friend just replaced the front 2 spindles and wheel races on his JD 135 after his second mowing season. He mows a half acre. He greased at least every 3 mows. The spindles each had 1 flat spot about 1/4 worn. Just out of the warranty. The spindles had to be soft . Anyone had this problem...

Just turned 500 hrs on my 02, 60" HustlerZ. After an hour mowing I shut the deck off and it wouldn't restart until the mower cooled down. This is the third time this has happened, twice last fall, and now. Does the switch or clutch need cleaned or adjusted, or is this soon to be a dealer issue...

Working on our 2002 Hustlerz 60". Idles up/dwn, not as noticeable at full throttle. Sonofadocker suggested manifold leaks,cracks in gas lines. Took carb off checked out ok. Is there a carb parts blow up available somewhere. I would like to check out the float bowl,and jets . There were two bolts...

I have an 02 Hustler z 60" 23hp Kawasaki with 450 hrs. At idle, it speeds up then slows down. At mowing speed it does the same but is not as noticeable. Last fall I replaced the fuel filter, spark plug and cleaned the air filter with no improvement. It's worse this spring, as it will die if...