Search results

Yes! I see the 'wings' are now where they attach to the frame and the ad pictures didn't present the shield correctly. I think mine is bent up and that is why it sets too high and hits the hood when opening. At least now I can order a new one when mine finally falls off again. Thanks so much...

Wow! How embarrassing! My mower # is YTH8542. I never thought I was dyslexic but I do find myself now at 73 reversing some numbers...I always check many times but this was 5 years ago! Oh well, Thanks for bringing it to my attention. I looked at your diagram and online manual and 532439870...

My mistake...I purchased in 2018. Is there a different shield # for the 2018 model then? I'll have to locate my manual. May have copied incorrect data. Will get back soon. Thanks.

My 2018 Husky has performed very well since purchasing it new. Model: 960450059. In April of this year I noticed my exhaust front shield was hanging down on the left side. I put a new bolt/washer/lock nut on. Yesterday (Sept. 28th) I noticed the bolt and hardware had fallen out and it was...

Just getting on forum due to health. Will read info you sent..thanks@

MT23..trying to raise front of deck 2" higher than rear..also now same pin height as front. for leaf collection..pulled pins out..deck doesn't move...deck in 2nd pins from top as was when purchased in 2013.

Kohler engine...Walker Mower MT23GHS...Tractor SN: 122738...Engine Model#: CH23-CH680

2013 Mower purchased new. The gearbox oil fill/check tube for the PTO I understand, have drained and replaced at 100 hours. The deck drive gearboxes I check yearly and understand. In greasing today, after many times I saw a label on the machine under(near) the battery area. There is a Allen...

I found 2 what looked like sensor hookups...disconnected...wiped with cloth...now the Oil Pressure Light comes on and alarm sounds! Will keep looking to see if I can locate Overheat Light. Will buy some anti-ox compound. Thanks again!

I will do this. I have found a few connectors and will try what you suggest. I hope to look at my manual today. Thanks!

Have the mower on my lift...looked at every wire and harness I could find...no red lights. Headlights work as always. Tested swivel grass spreader in dump cart as this is a grass handler system...you turn to first notch on ignition and engage PTO lever and spreader swivels as new...but alarm...

Good idea. I haven't taken it off yet. I took the bulbs out and they tested good. Kept trickle charger on. Sometimes when starting to first notch...the one red light would come on and alarm sounds..then the next time..nothing..the mower started up as normal...I took battery out and cleaned...

I checked oil 3 different times after running....FULL at mark. Oil only has 3 hours on after last oil/filer change last November after last mow. Will take blower top off and air pressure. WIll get back.

First time this happened since new. Started the other day from winter storage. Gas added and started right up. Let run 10 minutes and shut off. Later when starting noticed no oil pressure red light and overheating red light (2) on and no alarm sound as was usual. Turned on and off 3x and no red...

Hello. I wanted to update you. I received my new fuel pump and it still didn't start. I took the air intake hose off and shot some starter fluid in and she started right up! I let her idle for 10 minutes and then mowed re 20 minutes. Then I stopped and started her 2x and she worked like new. Do...

I did have the blades on the wrong sides. I swapped them and cuts like new. I now only take one off at a time so I don't get them mixed up.

I purchased this mower new in 2013. Haven't had any problems until last week. Drained the gas and ran dry and then added a gallon of fresh gas + Sea Foam as I do at the end of each season. Ran her 5 minutes to circulate gas on 11/2019. Put in fresh gas last week and she cranked as new with...

I thought I noticed last Fall leaving some higher areas of grass while 95% cuts even as new. I have 250 hrs. On with original blades sharpening once a year (50 hours). Mowing the other day it seemed to be the same. I put new blades on yesterday but it still is not as even a cut as before. Some...

I bought this mower from one owner with 235 hours. Ran great for about 10 hours There was excess oil dripping from the crankcase hose to the carb. Oil level was correct. Sputtered on and off and then stopped. Would not start. This was 11/17. 4/18: I Emptied gas tank and put fresh fuel in. Put...

Most of you probably know this but I thought it worthwhile to write about. I bought my Walker new in 2013. I always put about an ounce of Seafoam in each can of gas. After each mowing season I have maybe 1 gallon of gas or so left and put a few extra ounces of Seafoam in..run the engine 5...

Hello. Has anyone put a snowblower on their Walker mower? I want to know if it is easy to take the mowing deck off and attach the snowblower..and then reverse in the mowing season. I am frustrated with trying to get ny 2002 Sears snowblower on and off and am looking for a simple on and off with...

I've had this 42" blower that I put on for winter and off for summer to mow with. I keep notes. The manual has the most confusing directions I have ever encountered, for hooking up the belt and idler assembly (at least for me). so I kept my own notes. One year it went on so easy I was shocked...

I would like to know that before starting an engine with a rope pull starter....if you pull it a few times without starting the engine...does it circulate some oil around/into the motor? Thank you. Pochie

1991 Cub Cadet..original owner. PTO always worked 100% until yesterday. While mowing, lots of smoke coming up from engine area..smelled like rubber burning. Stopped and waited 5 minutes. Started OK and drove to garage. Checked for broken belts, branches, etc..and all appears OK. Turned on and...

I bought this mower new in 1984. I really haven't used it much in 30 years, sometimes sitting for years. I last ran it 3 years ago, but I think it had this problem then. It started on 1st pull after adding fresh gas. It only starts and runs with the clutch brake lever held in..when I disengage...

I thoroughly cleaned the deck, impellar and hosed off the grass,etc. on the engine. I had it running to engage the impeller and soaked her well. She started many times while I was cleaning. After I'm done....just the oil pressure light comes on and the starter doesn't engage. I let her dry out 7...

I installed new magnetos for my 21.5 HP Craftsman rider. They do not fit as close as the originals and I cannot get them closer than about 1/8". The old ones were much closer..probably 1/16". My question: can this cause the mower to not turn off when key if turned OFF? It doesn't sound like it...

I have a 2002 I/C Intex Platinum engine. I have to modulate the engine with the choke when running without the PTO engaged...it runs 99% and when I engage the PTO...she cuts at about 85% but I have to fool with choke on and off. I use seafoam in every tank of gas....Today I dismantled the...

Hi. Please tell me how to 'oil' the gearboxes that drive the mandrels (blades). The manual is a joke for information. Do you take the two screws out on top of the foot mat? Do you oil the blade spindles underneath? Do you check some fluid level? Thank you for any help. Pochie

...after winter storage. Last ran in November 2013...I always use Seafoam in my gas. I ran her dry. Today I wanted to start her and no luck. Battery strong.....filled with fuel.....choke on FULL and gas to FULL. I know sometimes I pour a small amount of gas in the carb in other mowers. I didn't...

I have a 1991 Cub Cadet. It has the Kohler 17 hp engine. I currently have Champion RC17YC plugs that I put in in 2006. I have checked many spark plugs sites and none can give me a conversion for other plugs, including Champion. She runs well, I just thought I'd put some new ones in. Any help is...