Thread: Scag turf tiger wont start
07-26-2013, 11:52 PM #1
- Join Date
- Jul 2013
Scag turf tiger wont start
When I turn the key to start, nothing! I have checked the fuses, replaced the ignition module, checked the starter solenoid and relay, checked all switches including key switch except the seat switch. At first the mower would start at times but not always. Now it wont start at all. Mower is 2000 model 61 inch turf tiger.
07-27-2013, 08:41 AM #2
- Join Date
- Jul 2011
- Scag Tiger Cub, Ingersoll 4018, Hustler X-ONE MoJack Pro
Re: Scag turf tiger wont start
There is a start/cranking relay close to the key switch. When all the safety circuits are in line, then the module will ground the coil in the relay and allow cranking of the engine. The seat switch is one of the major players in the safety circuits, but actually all the switches play into the safety circuits including the PTO switch.
If you do not have an operators manual which has the wiring diagram, you can download a manual from the Scag website, you will need the model and serial numbers from your machine to find the correct manual.
By jlkcfire in forum Small Engine & Mower RepairReplies: 1Last Post: 07-23-2013, 03:45 PM
By Sdupus in forum Small Engine & Mower RepairReplies: 1Last Post: 06-14-2013, 04:52 PM
By glomoore in forum Scag ForumReplies: 1Last Post: 05-22-2013, 04:03 PM
By JCC in forum Small Engine & Mower RepairReplies: 0Last Post: 03-19-2013, 10:35 AM
By scag43 in forum Small Engine & Mower RepairReplies: 2Last Post: 10-05-2012, 01:05 PM