Results 1 to 9 of 9

Thread: ranch king pro

  1. #1

    Join Date
    May 2012
    Posts
    6
    Location
    Missouri
    Mower
    wizard

    ranch king pro

    I HAVE A RANCH KING PRO RIDING LAWN MOWER AND WHEN I SET THE BRAKE IT WONTS TO KEEP ROLLIING I WOULD LIKE TO KNOW IF ANYONE HAS THE PITURE ON HOW TO SET THE BRAKE SO THE RANCH KING PRO RIDING LAWN MOWER WONT KEEP ROLLING AND HOW MUCH TO SET THE BRAKE ITS HYDRSTAIC 46 INCH DECK 18.5 HP BRIGGS&STRATTON V TWIN

  2.  

  3. #2

    Join Date
    Mar 2012
    Posts
    5,370
    Location
    Wisconsin
    Mower
    Toro

    Re: ranch king pro

    You don't give us any numbers to identify the exact transmission you have, but I'll see if my ESP is working today. If you look on the left side of the transmission, you should see a brake rotor sticking out. There will be a brake pad holder mounted over the top of the rotor. You will see two small bolts and one large nut. Under that nut you will see the brake lever. By tightening that nut you will be able to add tension to the brake. Make small adjustments and test after each one. Too much tension will ruin your brake pads and/or rotor. If my ESP is off today, it may be on the right side, or you many have a different transmission than the one I am thinking about. Disclaimer. This is just my opinion and many of the younger members of this forum say it ain't worth much cause I'm an old fart.

  4. #3
    Bob E's Avatar
    Join Date
    Feb 2013
    Posts
    46
    Location
    Michigan
    Mower
    MTD - Yard Machines

    Re: ranch king pro

    You could try looking up the operators manual for your rider
    http://www.mtdproducts.com/equipment...0500&langId=-1
    They usually have good directions for all the linkage adjustments and what not.
    putta putta putta putta putta ...

  5. #4

    Join Date
    May 2012
    Posts
    6
    Location
    Missouri
    Mower
    wizard

    Re: ranch king pro

    i need to know if anyone has the drigrame of the lever control to the blades when mowing the yard it wonts to keep falling down and i need to know how to set the tension thank you

  6. #5

    Join Date
    May 2012
    Posts
    6
    Location
    Missouri
    Mower
    wizard

    Re: ranch king pro

    I have a2001 ranch king pro riding lawn mower and I need a vacuum fuel pump kit to replace the old one if someone could help me out thankyou.

  7. #6
    briggs's Avatar
    Join Date
    Sep 2010
    Posts
    720
    Location
    Kingston ontario canada
    Mower
    murray,jhon deere honda,mastercraft ,MTD junk and many more

    Re: ranch king pro

    Quote Originally Posted by hamblen1948 View Post
    I have a2001 ranch king pro riding lawn mower and I need a vacuum fuel pump kit to replace the old one if someone could help me out thankyou.
    Can u please post a model number thanks
    when all else fails ..Hit it with a hammer

    (I am here to help out where i can ..I will not be little u for asking a Question there is no such thing as a stupid question )

  8. #7

    Join Date
    May 2012
    Posts
    6
    Location
    Missouri
    Mower
    wizard

    Re: ranch king pro

    modle number 13as698h205 briggs&Stratton engine number modle#42a707 this is held on with 4 scwers is that normal vcuumm fuel pump kit the fuel pump fits on the front of the carbutor

  9. #8
    briggs's Avatar
    Join Date
    Sep 2010
    Posts
    720
    Location
    Kingston ontario canada
    Mower
    murray,jhon deere honda,mastercraft ,MTD junk and many more

    Re: ranch king pro

    Quote Originally Posted by hamblen1948 View Post
    modle number 13as698h205 briggs&Stratton engine number modle#42a707 this is held on with 4 scwers is that normal vcuumm fuel pump kit the fuel pump fits on the front of the carbutor

    yes on those I/C twins they are normal ....They are easy to get parts for... Any small engine parts store can get them take your engine model number with u so they can get u the right one .....Here is what it looks like

    http://ts1.mm.bing.net/th?id=H.46118...=300&h=300&p=0
    when all else fails ..Hit it with a hammer

    (I am here to help out where i can ..I will not be little u for asking a Question there is no such thing as a stupid question )

  10. #9

    Join Date
    May 2012
    Posts
    6
    Location
    Missouri
    Mower
    wizard

    Re: ranch king pro

    I HAVE THE RANCH KING PRO RIDING LAWN MOWER I WOULD LIKE TO KNOW WHERE I CAN GET THE RUBBER BOOT THAT FITS IN THE CENTER OF THE AXL TO TURN THE WHEELS LEFT OR RIGHt SLIPS OVER THE BIG WASHER COVER THE AXL TO HOLD THE GREASE IN

Similar Threads

  1. Ranch king
    By JaRod12345 in forum Mower & Equipment Buying & Pricing
    Replies: 1
    Last Post: 10-27-2012, 09:33 PM
  2. Swisher ranch king 60" help!!!
    By fxstcustom in forum Small Engine & Mower Repair
    Replies: 3
    Last Post: 08-20-2012, 03:19 PM
  3. Ranch King Won't Start
    By pantherguy in forum MTD Forum
    Replies: 2
    Last Post: 03-28-2012, 03:28 PM
  4. ranch king wont crack with key
    By ccarpen4753 in forum Small Engine & Mower Repair
    Replies: 6
    Last Post: 12-07-2011, 02:48 AM
  5. ranch king deck help needed
    By ccarpen4753 in forum Small Engine & Mower Repair
    Replies: 8
    Last Post: 09-13-2011, 09:20 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •