Recent content by Wirespider01

I've drove it around a bit and no blown fuse. Didn't mow with it yet as I like my zero turn when I'm in a hurry. One thing I did notice is after I ran it around the yard and driveway and such it now suffers from run on. I had to choke it to kill the run on. So I'll need to run new wire and put...

No its not confirmed. I eliminated the wire and the plunger on the old one for now. It was the only thing that I was able to unplug in the beginning and not blow the fuse. So, if I find out its something else, its easily repaired by putting the red wire back into the plug and putting the brand...

Thanks Cajun Power. Before posting here I completely unplugged the PTO and turned the key over one click and the fuse blew. I also already disconnected the headlight harness and it popped the fuse. No flattened or Skinned wires. I've eliminated the fuel solenoid and the wire from the main...

Thanks. I've always had power at the solenoid. I unplugged the whole harness before it goes up into the ignition switch. I traced most of the wires all seem good. I put a new rectifier on JIC. I put a brand new solenoid in turned the switch and it popped the fuse. So I removed the red wire from...

Thank you.

I removed mine. it just unscrewed from the bottom of the bowl with a 1/2 thin spanner wrench like others I've changed. No need to take carb off. The PN you gave me was off a few mm off each measurement. I put in goggle search my engine model + fuel solenoid and I stumbled upon one with the right...

34

Thanks, I checked that kit. I'm confused as it doesn't show another wire for the solenoid. It has carb mounting gaskets, what looks like a bowl gasket, new solenoid and a new solenoid washer. It shows that the new solenoid screws into the bottom of the bowl. I'll post a pic. Oh and a zip tie is...

Thank you I'll check when I get home.

Mine already is a 2 wire plug. a black wire from the plug comes out and attaches to the engine. Checked continuity with meter and it's good. I also had checked the red wire for short to ground but found nothing. Is there anyway that the ground and hot can't short inside the solenoid? I just...

Hi everyone. i have a Cub Cadet 13WQ93AP009 LTX 1050. Its garage kept and has 200 hours. The engine is a Kohler KT735-3012 MTD. I used it the other day and after about a hour it shut off. It was completely dead. I got it in the garage and found the main 20 A fuse was blown. Replaced it and it...

Hello everyone. I have a craftsman dys 450 54" cut with a 26 kohler.. It was my workhorse. I really keep up on the maintenance of this machine. In fact last year I put a lot of money into by buying a new deck, blades and so on. The deck wasn't too bad I just like to practice preventative...