Recent content by southam

Runs rough and seems to be possibly not firing every time...wondering if something gotloose or broke , My guys ued it after three mount bolts fell out and the motor almost fell out , it was shaking violently..Also just discovered that the idle mixture screw does nothing , runs the same all the...

Kohler CV740-3119 Serial #3932203061 I have bad leak that is dripping off the round aluminum plate that is part of the oil "pan" that the oil cooler and filter are attached to . First I replaced O-ring behind plastic cooler mount . Not it .Thought the plastic mount with the 2 oil...

Motor kicks and coughs . sometimes runs for 15 seconds if I hold governor all out.New carb . Any Ideas why it wont go?

This is the second time both manifold nuts are missing. The first time I thought I't came that way from the factory. I replaced gaskets and installed new nuts as tight as I could. They are missing again. They are almost impossible to get to I'm thinking about loosening the motor so I can get my...

I have a model LZAS27KC524 ser 854726 and no owners manual.. I want to top off the steering fluid .. Older one took synthetic 15-50..Is it the same ?

I have a CV740 with 2000 hrs on it..About once a week it seems locked up when you try to start it then it smokes real bad when it starts.. Any ideas what could be the problem ??

Where is the model/ serial number located of the unit NOT the engine ??

Starts and runs well for about two mins. then bogs down. Playing with the choke no help. Seems to run ok when cold

pull cord not rewinding on my red max trimmer. Took it apart but I must be missing something I cant figure what broke.

My Kohler CV740 Seems like it runs Backward when shut off.It almost stops and then runs Funky with a knock..Any Ideas ???

Is there a trimmer attatchment for a 52"

Friend says Calverton Cemetery ol Long Island has trimmers mounted on their mowers, powered by the belt drive used for bagger pic-up but hes not sure if its rigged by someone or store bought.. Has anyone seen this before ?

HOW to change auger belt

Little Wonder 110v blows fuse after awhile on Honda 2000w Gen. I have cleaned and greased inner assembly and brushes still NG.

My LITTLE WONDER 110v runs for a while then blows fuse on 2000w Honda Gen. Have cleaned and greased moving inner assembly and cleaned brushes still NG.