Recent content by pollishpickle

  1. P

    Replacing broken Craftsman sockets

    I have some impact sockets that I broke using a heavy duty impact wrench
  2. P

    New Graveley ZTXL owner

    For the jerky check your dampeners. Mine started to jerk and one of the dampeners was disconnected
  3. P

    John Deere 175, very hard to steer

    Your king pins may be rusted up and you may have to replace them
  4. P

    tell me about your gravely pro turns

    I have a pro turn 460 with the yamaha engine. I do like the air ride seat. it cuts nice ever since I removed the baffle from the mower deck.
  5. P

    Yamaha engines

    Yes it is the EFI
  6. P

    Yamaha engines

    I had a Kawisaki before and my Yamaha uses less gas I can mow 3 acres and only use about 1 gallon the Kaw used about 2 gallons
  7. P

    Yamaha engines

    What don't you like about it. My EFI one runs really good and is real stingy with the fuel. I can mow my place and only use about 1 1/2 gallons of gas where the Cub Cadet that had the Kow with less HP used abot 2 1/2 gallons
  8. P

    I drove a gravely for the 1st time today

    I have a Gravely Proturn 460 and my sister in law has an older Gravely 52 or 54 and I had to mow for her as her husband left her. I used her mower and swore I would never use it again as it has no suspension and mine has an air ride seat it about killed me from the bouncing. My wife ask why I...
  9. P

    Pro Turn 460 clumping

    Those look like the blades I have not changed them just sharpen. I have read that the Exmark blades work better so I think I will try a set of them. They have a notch on them that people say makes them discharge better. My baffles are not adjustable.
  10. P

    Pro Turn 460 clumping

    The grass is dry the deck is adjusted right the tire pressure is correct and the Blades are Gravely
  11. P

    Pro Turn 460 clumping

    I have a 2017 Pro Turn 460 and I am not getting a nice cut. It has always seemed to clump the clippings and leaves the yard looking real bad I have sharpened the blades tried raising the deck tried different speeds but nothing seems to work I am only cutting about 3/4 inches off the top I have...
  12. P

    LM21SW starting issues

    I use a velcro strap for that on my Lawn Boy.
  13. P

    LX 46 EFI Won't start

    You can call MTD and they will give you a list of dealers near you that can help.
  14. P

    Gravely proturn152

    go to the parts list and see if it is listed.
  15. P

    Reverse Problem with my new Gravely

    Call a different dealer and see if they have the same problem. Call Gravely and see what they can do for you. I had a Cub Cadet that had a problem that could not be fixed in 6 times to the 2 different dealers and finally they warrantied it out and I ended up with a Gravely as it was the end of...
Top